background image

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert 

the user to the presence of 

uninsulated "dangerous volt-

age" within the product's enclo-

sure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an 

equilateral triangle is intended 

to alert the user to the presence 

of important operating and 

maintenance (servicing) instruc-

tions in the literature accompa-

nying the appliance.

Power disconnection. Unit with or without ON-OFF 

switches have power supplied to the unit whenev-

er the power cord is inserted into the power 

source; however, the unit is operational only when 

the ON-OFF switch is in the ON position. Unplug 

the power cord to disconnect the main power for 

all units.

WARNING:

•  Apparatus shall be connected to a mains sock

-

et outlet with a protective earthing connection.

•  The mains plug or an appliance coupler shall 

remain readily operable.

•  To prevent fire or electric shock hazard, do not 

expose this apparatus to rain or moisture.

•  The apparatus should not be exposed to drip

-

ping or splashing and that no objects filled with 

liquids, such as vases, should be placed on the 

apparatus.

•  All work related to the installation of this prod

-

uct should be made by qualified service per-

sonnel or system installers.

•  For PERMANENTLY CONNECTED 

APPARATUS provided neither with an all-pole 

MAINS SWITCH nor an all-all pole circuit 

breaker, the installation shall be carried out in 

accordance with all applicable installation 

rules.

•  The connections should comply with local elec

-

trical code.

We declare under our sole responsibility that the product 

to which this declaration relates is in conformity with the 

standards  or  other  normative  documents  following  the 

provisions of Directives 2006/95/EC and 2004/108/EC.

Nosotros declaramos bajo nuestra única responsabili dad 

que  el  producto  a  que  hace  referencia  esta  declaración 

está  conforme  con  las  normas  u  otros  documentos 

normativos siguiendo las estipulaciones de las directivas 

2006/95/CE y 2004/108/CE.

Noi dichiariamo sotto nostra esclusiva responsabilità che 

il  prodotto  a  cui  si  riferisce  la  presente  dichiarazione 

risulta  conforme  ai  seguenti  standard  o  altri  documenti 

normativi  conformi  alle  disposizioni  delle  direttive 

2006/95/CE e 2004/108/CE.

Wir erklären in alleiniger Verantwortung, daß das Produkt, 

auf das sich diese Erklärung bezieht, mit den folgenden 

Normen  oder  normativen  Dokumenten  übereinstimmt. 

Gemäß  den  Bestimmungen  der  Richtlinie  2006/95/EC 

und 2004/108/EC.

Nous  déclarons  sous  notre  propre  responsabilité  que  le 

produit  auquel  se  réfère  la  présente  déclaration  est 

conforme  aux  normes  spécifiées  ou  à  tout  autre 

document  normatif  conformément  aux  dispositions  des 

directives 2006/95/CE et 2004/108/CE.

Wij  verklaren  als  enige  aansprakelijke,  dat  het  product 

waarop deze verklaring betrekking heeft, voldoet aan de 

volgende  normen  of  andere  normatieve  documenten, 

overeenkomstig  de  bepalingen  van  Richtlijnen  2006/95/

EC en 2004/108/EC.

Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som 

denne  deklaration  omhandler,  er  i  overensstemmelse 

med standarder eller andre normative dokumenter i følge 

bestemmelserne  i  direktivene  2006/95/EC  og  2004/108/

EC.

Vi deklarerar härmed vårt fulla ansvar för att den produkt 

till 

vilken 

denna 

deklaration 

hänvisar 

är 

överensstämmelse  med  de  standarder  eller  andra 

normativa dokument som framställs i direktiv nr 2006/95/

EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 

tämä  ilmoitus  koskee,  noudattaa  seuraavia  standardeja 

tai  muita  ohjeellisia  asiakirjoja,  jotka  noudattavat 

direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.

Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som 

denne  erklæringen  gjelder  for,  er  i  overensstemmelse 

med  følgende  normer  eller  andre  normgivende 

dokumenter  som  følger  bestemmelsene  i  direktivene 

2006/95/EC og 2004/108/EC.

Summary of Contents for WV-NP502E

































Reviews: