background image

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert 

the user to the presence of 

uninsulated "dangerous volt-

age" within the product's enclo-

sure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an 

equilateral triangle is intended 

to alert the user to the presence 

of important operating and 

maintenance (servicing) instruc-

tions in the literature accompa-

nying the appliance.

WARNING:

•  This apparatus must be earthed.

•  Apparatus  shall  be  connected  to  a  mains 

socket  outlet  with  a  protective  earthing  con-

nection.

•  The  mains  plug  or  an  appliance  coupler  shall 

remain readily operable.

•  All work related to the installation of this prod

-

uct  should  be  made  by  qualified  service  per-

sonnel or system installers.

•  The  connections  should  comply  with  local 

electrical code.

FOR YOUR SAFETY PLEASE READ THE 

FOLLOWING TEXT CAREFULLY.

WARNING: This apparatus must be earthed.

IMPORTANT

The wires in this mains lead are coloured in accor-

dance with the following code.

 

Green-and-yellow: 

Earth

 

Blue: 

Neutral

 

Brown: 

Live

  As  the  colours  of  the  wire  in  the  mains  lead  of 

this  appliance  may  not  correspond  with  the 

coloured  markings  identifying  the  terminals  in  your 

plug, proceed as follows.

  The  wire  which  is  coloured 

green-and-yellow

 

must be connected to the terminal in the plug which 

is marked with the letter 

E

 or by the earth symbol 

I

 

or coloured 

green

 or 

green-and-yellow

.

  The  wire  which  is  coloured 

blue

  must  be  con-

nected  to  the  terminal  in  the  plug  which  is  marked 

with the letter 

N

 or coloured 

black

.

  The wire which is coloured 

brown

 must be con-

nected  to  the  terminal  in  the  plug  which  is  marked 

with the letter 

L

 or coloured 

red

.

We declare under our sole responsibility that the product 

to which this declaration relates is in conformity with the 

standards  or  other  normative  documents  following  the 

provisions of Directives 2006/95/EC and 2004/108/EC.

Wij  verklaren  als  enige  aansprakelijke,  dat  het  product 

waarop deze verklaring betrekking heeft, voldoet aan de 

volgende  normen  of  andere  normatieve  documenten, 

overeenkomstig  de  bepalingen  van  Richtlijnen  2006/95/

EC en 2004/108/EC.

Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som 

denne  deklaration  omhandler,  er  i  overensstemmelse 

med standarder eller andre normative dokumenter i følge 

bestemmelserne  i  direktivene  2006/95/EC  og  2004/108/

EC.

Vi deklarerar härmed vårt fulla ansvar för att den produkt 

t i l l   v i l k e n   d e n n a   d e k l a r a t i o n   h ä n v i s a r   ä r   i 

överensstämmelse  med  de  standarder  eller  andra 

normativa dokument som framställs i direktiv nr 2006/95/

EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 

tämä  ilmoitus  koskee,  noudattaa  seuraavia  standardeja 

tai  muita  ohjeellisia  asiakirjoja,  jotka  noudattavat 

direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.

Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som 

denne  erklæringen  gjelder  for,  er  i  overensstemmelse 

med  følgende  normer  eller  andre  normgivende 

dokumenter  som  følger  bestemmelsene  i  direktivene 

2006/95/EC og 2004/108/EC.

CAUTION:

An ALL-POLE  MAINS  SWITCH  with  a  contact 

separation of at least 3 mm in each pole shall be 

incorporated  in  the  electrical  installation  of  the 

building.

Turn the power off at the mains to disconnect the 

main power for all unit.

Summary of Contents for WV-CW504SE













































Reviews: