manualshive.com logo in svg

Panasonic WV-CW504F, Installation Manual

Share
Download
Panasonic WV-CW504F Installation Manual Download Page 41

41

Standard accessories

CD-ROM*  ................................................................... 1 pc.
Installation Guide (this book)  ....................................... 1 pc.
Warranty card  ............................................................. 1 pc.
*The CD-ROM contains the operating instructions (PDF). 

The following parts are used during installation procedures.
Base cover (for WV-CW504S, WV-CW504SK)  ........... 1 pc.
Mounting base 
  (for WV-CW504S, WV-CW504SK)  ............................ 1 pc.
Fixing screw for mounting base 
  (for WV-CW504S, WV-CW504SK)  ............................ 5 pcs.
  (incl. 1 spare screw)
Fixing screw for ceiling mount bracket 
  (for WV-CW504F, WV-CW504FK) ............................. 5 pcs.
  (incl. 1 spare screw)
Camera attachment  .................................................... 1 pc.
Bit for tamperproof screw ............................................ 1 pc.
Butyl tape  ................................................................... 1 pc.
     

Optional Accessories

Dome cover 

WV-CW4S Weight: Approx. 110 

g

 {0.24 lbs.}

Heater unit 

WV-CW5H Weight: Approx. 50 

g

 {0.11 lbs.}

Mounting base 
  (only for WV-CW504F, WV-CW504FK) 

WV-Q115 Weight: Approx. 350 

g

 {0.77 lbs.}

Ceiling mount bracket 

WV-Q169 Weight: Approx. 700 

g

 {1.55 lbs.}

Summary of Contents for WV-CW504F













































Reviews:

No comments

Brands by name

Popular brands

Load more brands