1
Photographs were taken for the purpose of explanation; actual images may differ.
Use four screws (option) to attach
Mounting Adapter Box to wall.
Sun Shield
Mounting Adapter Box
Mounting Arm
Mounting Plate
Tilt Bracket
Tilt Lock Screw
Pan Bracket
Pan Lock Screw
Rear Cover
8x Variable-focal Lens
Blue LED
(Both sides)
Protective Housing
Blue LED
(Both sides)
Attach Mounting
Adapter Box to wall.
3
Pass the camera cable through the
Mounting Arm and attach to wall cable.
Attach Camera to
Mounting Arm.
5
Use two screws provided.
Attach Trim Covers
2
Set Hinge Screw provided to allow
opening and closing
Attach Mounting Plate
to Hinge.
4
Use four screws provided to attach
Mounting Plate.
Secure Mounting Plate.
Finished !
6
7
6
A total outdoor surveillance solution in one stylish unit
Super Dynamic
II
camera, 8x variable-focal lens, Fan/Heater, Protective Housing, Pan/Tilt bracket,
Mounting Arm, Mounting Plate, and Mounting Adapter Box are all included.
D e s i g n
SIMPLE & EASY TO INST
ALL
Invisible Cable; Clean, Simple Lines
Both camera and wall cables are
concealed inside the bracket.
Simple Installation Procedure
3-way Installation
Equipped with Monitor output connector
Since a small LCD monitor
(option) can be attached to
the monitor output connector
(3.5mm in diam. Mini jack),
camera angle and focus can
be checked on the spot.
Fits neatly above the existing junction box.
Installation is simple because the Mounting Adapter Box
and Mounting Plate are designed to be mounted directly
above the existing junction box.
The opening can be either
on the left or the right side
The Mounting Plate
opening can be either
on the left or the right.
However, it is best if
one side is tightly
pressed against a wall.
Cables through wall with Mounting Adapter Box
Using Conduit (Flexible pipe) with Mounting Adapter Box
Direct mount without Mounting Adapter Box
Pan
Tilt
Cable in wall
Cable in conduit
Cable in wall, connected
directly to Mounting Plate*
(* The four screws required to attach the Mounting
Plate to the wall are not provided)
1
2
3
Flexible camera angle settings
The bracket allows the camera to Tilt +30° ~ –90° and pan,
making it possible to freely adjust the camera angle.
