14
Preparations
The camera can be directly mounted on the wall or ceiling.
Important:
• Prepare the mounting screws according to the material of the area where the camera mount
bracket is to be installed. In this case, wood screws and nails should not be used. Recom-
mended tightening torque M4: 1.60 N·m {1.18 lbf·ft}
• Required pull-out capacity of a single screw/bolt is 196 N {44.06 lbf} or more.
• If a wall or ceiling board such as plaster board is too weak to support the total weight, the area
shall be sufficiently reinforced.
<WV-CW304LE>
Set button
IR LED
Lens
Packing
Monitor output
jack
