Panasonic WV-CS400, Operating Instructions Manual

Page: 16 / 29

- 13 -
* ALC CONT *
BACK LIGHT COMP
PRESET OFF
MASK SET *
LEVEL ....I....
−
+
RET
(1)-1 ALC Mode with Preset Mode (PRESET ON)
• Move the cursor to the "PRESET" mode position and select the "ON" mode by using the Joystick. The
preset mode menu is displayed on the monitor screen as shown.
• Move the cursor to "RET" position by using the Joystick and press the CAM (SET) Button to return to the Set
Up menu.
(1)-2 ALC Mode with Field Setup Mode (PRESET OFF)
• Move the cursor to the "PRESET" mode position and select the "OFF"
mode by using the Joystick.
• The field setup menu is displayed on the monitor screen as shown.
• Move the cursor to the "MASK SET" mode position and press the CAM
(SET) Button. The 48 Mask Areas appears on the monitor screen.
The left top area has a blinking cursor.
• To mask this area, press the CAM (SET) Button. The mask and the
cursor start blinking alternately.
B
Blinking
Blinking
Blinking
Turns to white
• To mask other areas, move the cursor to the desired area by using
the Joystick. Then press the CAM (SET) Button to mask that area.
The area turns to white.
• When the cursor is moved to an area that has already been masked,
the mask and cursor start blinking alternately.
• Press the CAM (SET) Button if this masking for this area is to be
canceled.
• Press the F2 Button of WV-CU550A when all masking areas are to be
canceled.
• After masking is completed, press the CAM (SET) Button for more
than 2 seconds. The 48 Mask Areas on the monitor screen disappear
and the field setup menu is then displayed.
• If the video output level (picture contrast) is to be changed, move the
cursor to the "LEVEL" mode position and control the Joystick to adjust
the iris of the ALC lens. When the cursor is moved in the right (+)
direction, the lens iris is opened wider, causing the video output level
to rise.
If the cursor is moved in the left (
−
) direction the reverse takes place.
• Move the cursor to "RET" position by using the Joystick and press the
CAM (SET) Button to return to the Set Up menu.
* ALC CONT *
BACK LIGHT COMP
PRESET OFF
MASK SET *
LEVEL ....I....
−
+
RET