12
Major operating controls and their functions
(Side view)
(Bottom view)
(Rear view)
<WV-CP604E, WV-CP624E>
<WV-CP600/G, WV-CP620/G>
4
5
UP
SET
7
1 2 3
220 V-240 V
~50/60 Hz
VIDEO OUT
2
1
8
3
24V~IN 2-N
1-L
1 2 3
12V IN
-,
VIDEO OUT
6
8
2
3
(UP)UP
(DOWN) SET
(LEFT)
(RIGHT)
1
AC power input terminal [220 V-240 V
~50/60 Hz]
<Only for WV-CP600/G, WV-CP620/G>
Connect with the supplied power cord.
2
Video output connector [VIDEO OUT]
Provides video output to system units.
3
Tripod mount base
This is used to install the camera onto the
mount bracket (locally procured).
4
ALC lens connector
Connects to ALC lens (4-pin).
5
Back focus adjustment screw
Adjusts the back focus distance and
image focal length.
6
Power input terminal [12 V IN, 24 V~IN]
<Only for WV-CP604E, WV-CP624E>
The power supply of 24 V AC or 12 V DC is
connected to this terminal.
7
Setup button [SET]
Press the [SET] button once and the "FOCUS
ADJUSTMENT" screen will be displayed.
Hold down the [SET] button for more than
2 seconds and the setup menu screen will
be displayed.
•
[LEFT]/[RIGHT]: Press the [RIGHT] or [LEFT]
button to move to the right or left in the
menu, or change the displayed values.
•
[UP]/[DOWN]: Press the [UP] or [DOWN]
button to move up or down in the menu.
(The directions of "UP", "DOWN", "LEFT"
and "RIGHT" are as shown when you are
directly facing "UP".)
•
[SET]: Press this button in the menu to
confirm the selected value or function.
In addition, this button is used to open
submenus.
8
External I/O terminal
Used for connections with external devic-
es.
