background image

5

Preface

This product is a 1/3-inch type {1/3"} CCD color CCTV camera. Connection of this product to a 
video monitor allows users to use this product as a monitoring camera. 
  •  WV-CP500: 220 to 240 V AC power supply 
  •  WV-CP504: 24 V AC, 12 V DC power supply 

Introduction of SUPER-D5 (super dynamic function)

Integration  of  SUPER-D5  into  the  CCD  and  signal  processing  circuit  has  achieved  approximately 
160  times  higher  dynamic  range  as  compared  with  conventional  camera.  Thanks  to  the  integra-
tion of the darkness compensation function, a subject on which much illuminance difference exists 
resulting from bright and dark areas can be naturally displayed in an image. 

Introduction of newly developed high-resolution CCD

The introduction of the newly developed CCD with 976 of horizontal pixels has led to the horizontal 
resolution of as high as 650 TV lines (typ.). 

Auto back focus function (ABF) equipped

Moving the CCD inside the camera to an optimal position with the operation button of this unit or 
the setup menu allows users to automatically adjust the back focus. 
The back focus is adjustable with the setup menu through the system controller (option) even after 
installation of this unit. 
The  auto  back  focus  function  also  allows  users  to  correct  out  of  focus  when  changing  between 
color and black-and-white images. 

High sensitivity achieved thanks to noise reduction function

Minimum illumination 0.1 lx (F1.4) has been accomplished for color images thanks to the introduc-
tion of low noise circuit design. 

Night monochrome image activation function equipped

No operation is required at night because the image automatically changes from the color mode to 
the black-and-white mode at low illuminance. 

Intelligent VMD (i-VMD) functions of motion detection and object abandonment/removal 
detection equipped

The motion and abandonment/removal of an object are detectable. 
The states of covering the camera with a cloth, a cap or others and changing the camera direction 
notably can be detected (scene change detection).
The  detection  resolution  has  been  significantly  improved  as  compared  with  a  conventional  type, 
and  the  introduction  of  the  newly  developed  detection  method  has  improved  detection  accuracy 
under the condition that the motion detection is prone to malfunction due to leaves swaying. 

Note:

  •  The  i-VMD  function  is  not  the  dedicated  function  to  prevent  thefts,  fires,  etc.  We  are  not 

responsible for any accidents or damages occurring in case. 

 

Summary of Contents for WV-CP500/G

































Reviews: