background image

Pick-up Device:

752 (H) x 582 (V) pixels, Interline Transfer CCD

Scanning Area:

4.89 (H) x 3.67 (V) mm (Equivalent to scanning area of 1/3” 
pick-up tube)

Synchronization:

Multiplexed vertical drive (VD2) by pulse from specified camera
drive unit.

Scanning System:

2 : 1 interlace

Scanning:

625 lines / 50 fields / 25 frames

Horizontal:

15.625 kHz

Vertical:

50 Hz

Horizontal Resolution:

480 lines

Video Output:

1.15 V[p-p] composite 75 

Signal-to-Noise Ratio:

50 dB (AGC OFF, weight ON)

Electronic Light Control:

Equivalent to continuous variable shutter speed between 1/50 s
and 1/15 000 s

Minimum Illumination:

0.6 lx (0.06 footcandle) at F0.75 [equivalent to 2.0 lx (0.2 foot-
candle) at F1.4]

Detail:

SHARP or SOFT, selectable 

Lens Mount:

CS-mount

Ambient Operating Temperature:

10°C - +50°C (14°F - 122°F)

Ambient Operating Humidity:

Less than 90 %

Power Source:

From WV-PS11B/WV-PS104C

Dimensions (without lens):

71 (W) x 65 (H) x 125.5 (D) mm
[2-25/32” (W) x 2-9/16” (H) x 4-15/16” (D)]

Weights (without lens):

0.46 

kg

(1.02 lbs)

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

SPECIFICATIONS

STANDARD ACCESSORIES

Body Cap....................................................................................1 pc.
Camera Mounting Bracket ........................................................ 1 pc.

OPTIONAL ACCESSORIES

Lenses : WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3, WV-LA908C3,

WV-LZ61/10, WV-LZ62/2, WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A, WV-LFY3C3, WV-LFY45C3,
WV-LFY9C3

Lens Mount Converter (C-mount Adapter):

WV-AD20

Camera
Mounting
Bracket

Note:

Coaxial cable can be passed through

the centre hole of the camera mounting
bracket.

Coaxial Cable

Fixing Screws

Camera Mounting
Bracket

φ

120 (

φ

4-3/4)

90

°

15 (9/16)

85 (3-3/8)

40 (1-9/16)

5.5 (7/32)

164 (6-7/16)

2-

φ

5 (2-

φ

3/16)

83.5 (3-5/16)

Cautions on installation

Use wood screws with the camera mounting
bracket that are suitable for Installation into a
wood base of appropriate dimensions and
strength. For the installation into a material other
than wood, refer servicing to qualified service per-
sonnel.

Unit: mm (inch)

DIMENSIONS OF MOUNTING BRACKET

Matsushita Electric Industrial Co., Ltd.

Central P.O. Box 288, Osaka 530-91, Japan

Summary of Contents for WV-CP110E

Page 1: ...s intended to alert the user to the presence of important operating and mainte nance servicing instructions in the literature accompanying the appli ance The lightning flash with arrowhead symbol within an equilateral trian gle is interned to alert the user to the presence of uninsulated dan gerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of e...

Page 2: ...or Connect a coaxial cable to be procured locally between this connector and the CAM ERA IN connector of the specific monitor or Camera Drive Unit Monitor supplies power to the camera and the camera supplies the video and audio out put to the monitor through the coaxial cable 0 Rear Cover The rear cover can be removed to gain access to the switches ON OFF POWER VIDEO OUT VIDEOOUT Control Monitor V...

Page 3: ...tions the camera does not func tion due to protect circuit from misconnec tion Basic System Connect the single coaxial cables between the Camera and Camera Input Terminal of Specified monitor or Camera Drive Unit The approx maximum cable length is as Coaxial Maximum DC R 1 000 ft Cable Cable of Inner Type Length Conductor RG 59 U 200 m 660 ft Less than 30 Ω RG 6 U 500 m 1 650 ft Less than 12 Ω The...

Page 4: ...9 16 H x 4 15 16 D Weights without lens 0 46 kg 1 02 lbs Weights and dimensions indicated are approximate Specifications are subject to change without notice SPECIFICATIONS STANDARD ACCESSORIES Body Cap 1 pc Camera Mounting Bracket 1 pc OPTIONAL ACCESSORIES Lenses WV LA2R8C3B WV LA4R5C3B WV LA9C3B WV LA210C3 WV LA408C3 WV LA908C3 WV LZ61 10 WV LZ62 2 WV LZ62 8 WV LF4R5C3A WV LF9C3A WV LFY3C3 WV LF...

Reviews: