3
Step4
Attach the enclosure to the camera
Secure the camera to the enclosure with the 2 enclosure fixing screws.
(The recommended tightening torque of the enclosure fixing screws is 0.59 N·m {0.44 lbf·ft})
⇒
Refer to the Installation Guide for more information about installing the camera.
IMPORTANT:
●
When the enclosure is attached, the camera's focus may go out of focus. Use the "Auto focus"
function in the setup menu to adjust the focus.
●
Remove the cover film after installation is complete.
●
If there are fingerprints or dirt on the dome cover, wipe it clean with a soft cloth.
n
Attach to WV-SF538/WV-SF539 and other models
Models that can use the WV-CF5S dome cover can also use the WV-CF5SA dome cover.
Read the following descriptions together with operating instructions of the camera.
Step1
Remove the enclosure from camera
1
Remove the enclosure fixing screw (M3, step screw).
2
Rotate the enclosure counterclockwise twice, align the marker with "OPEN", and then remove the
enclosure.
ADJUST
OPEN
LOCK
AF
Marker
Enclosure
1
Remove the
fixing screw.
2
Summary of Contents for WV-CF5SA
Page 7: ...7 ...
