Watching TV
3D
Replacing the battery
When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on.
In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
Confirm your 3D Eyewear type according to the battery cover.
Then, replace the battery following the steps of each type.
[Type A: Without screw]
[Type B: With screw]
[Type A: Without screw]
1.
Open the cover using pen tip or screwdriver (minus -) etc.
2.
Replace the battery
If difficulty, remove it with the tip of the driver.
Use the specified type of battery (coin-shaped lithium battery
CR2025).
Note the correct polarity (+ or -).
3.
Replace and fasten the cover
When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on.
In this case, early battery replacement is recommended.
When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on.
In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
Confirm your 3D Eyewear type according to the battery cover.
Then, replace the battery following the steps of each type.
Confirm your 3D Eyewear type according to the battery cover.
Then, replace the battery following the steps of each type.
[Type A: Without screw]
[Type B: With screw]
[Type A: Without screw]
[Type A: Without screw]
[Type B: With screw]
[Type B: With screw]
[Type A: Without screw]
[Type A: Without screw]
1.
Open the cover using pen tip or screwdriver (minus -) etc.
1.
Open the cover using pen tip or screwdriver (minus -) etc.
1.
Open the cover using pen tip or screwdriver (minus -) etc.
2.
Replace the battery
2.
Replace the battery
2.
Replace the battery
If difficulty, remove it with the tip of the driver.
Use the specified type of battery (coin-shaped lithium battery
CR2025).
Note the correct polarity (+ or -).
If difficulty, remove it with the tip of the driver.
Use the specified type of battery (coin-shaped lithium battery
CR2025).
Note the correct polarity (+ or -).
3.
Replace and fasten the cover
3.
Replace and fasten the cover
3.
Replace and fasten the cover
65
(0100807)