Panasonic WORKIO DP-C323 Operating Instructions Manual Download Page 190

Page: 190 / 220

190

hapt
er 8 R

eadi
ng R

epor
ts/

Reading Transaction Journal

Items in the transaction journal are listed below.

No.

Item

Explanation

(1)

Printout date

The date and time at which the Transaction Journal printed.

(2)

Printout time

Printout time.

(3)

Journal number

Journal number.

(4)

Communication result

“OK”

indicates that the communication was successful.

“Busy”

indicates that the communication has failed because of busy line.

“Stop”

indicates that STOP was pressed during communication.

“P-OK”

indicates that memory overflow occurred while storing the
documents into the memory for transmission but successfully
stored document(s) was sent.

“R-OK”

indicates that the Relayed XMT was successful.

“B-OK”

indicates that the Batch Transmission was successful.

“M-OK”

Indicates that the memory reception/ substitute reception was
successful.

“- -”

indicates LAN transmission.

“3-digit Info Code”

indicates that the communication has failed.
Refer to

Information Codes

(see page 208).

(1)

(2)

**************** -Journal- ***************************

Date MMM-dd-yyyy

**** Time 15:00 ***** P.01

(3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

No. Comm. Pages File Duration X/R Identification Date Time Diagnostic

001 OK 001/002 149 00:00:52 XMT

215 MMM-dd 20:04 C8444B0577000

002 -- 001/001 151 00:00:02 XMT TEST MMM-dd 20:07 001 STN(S)LAN

003 -- 003/003 153 00:00:20 XMT fax@nwfax1 MMM-dd 20:09 001 STN(S)LAN

004 OK 003/003 154 00:00:21 RCV [email protected] MMM-dd 20:10 LAN

005 OK 001 155 00:00:19 XMT 215 MMM-dd 20:11 C0542B0577000

006 634 000/003 156 00:00:00 XMT

215 MMM-dd 20:14 0800420000000

007 408 *003 00:02:14 XMT

215 MMM-dd 21:17 0040440A30080

049 OK 000/001 159 00:00:07 XMT TEL XMT MMM-dd 20:14 0800420000000

050 OK 001/001 160 00:00:16 XMT TEL XMT MMM-dd 20:19 CB444BG577000

<< Continue >>

(13)

-PANASONIC -

*******

DP-XXXX

****************** -HEAD OFFICE - ***** - 201 555 1212- *********

(15)

(14)

Summary of Contents for WORKIO DP-C323





























































































































































































































Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands

Panasonic WORKIO DP-C323, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands