Panasonic WORKIO DP-C323 Operating Instructions Manual Download Page 118

Page: 118 / 220

118

Cha

pter 5 Internet F

Setting

From

field

The

From

field is preset in the Machine, you can change the

From

field by selecting “

From

” on the

Email screen. To set

From

field, follow the steps below:

If “

145 Sender Selection

” is set to “

Valid

”, you can preset up to 25 sender names. You can select from

the sender list when sending an Email. However, if you select “

From

” on the Email screen, the sender

list will not be displayed.

For more details on this setting, refer to

Fax/Email Settings

in the Operating Instructions (For Function

Parameters) on the provided CD-ROM.

On the Email screen, select “

From

”.

(See page 107, and 116)

Enter a sender name, or select a
sender Email Address, and then select
“

Close

”.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then starts email transmission.

When “

145 Sender Selection

” is set to

“

Valid

”, and if you do not select “

From

“, the

Sender Selection List will be display after
pressing the

Start

key. Select a Sender, and

then select “

”.

Summary of Contents for WORKIO DP-C323





























































































































































































































Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands

Panasonic WORKIO DP-C323, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands