manualshive.com logo in svg

Panasonic Workio DP-C265, Service Handbook

The Panasonic Workio DP-C265 is a versatile multifunction printer that delivers high-quality prints and copies. To make the most of its features, you can easily access the comprehensive Operating Instructions Manual. This manual can be downloaded for free from manualshive.com, ensuring you have all the necessary guidance at your fingertips.

Share
Download
background image

320

DP-C405/C305/C265

 FEB 2008

Ver. 1.1

3.5.

Error Codes (For Copier)

The self-diagnostic functions detect malfunctions in the important components of the copier.
When any malfunction occurs, the copier stops, and displays a relevant error message on the Panel 
Display.

3.5.1.

User Error Codes (U Code)

Note:

Uxx, and a message will appear on the Panel Display.

User Error Codes (U Code) Table

Code

Item

Check Points

U0

Coin/Card Vender

1. Lacks a charge.
2. Vending Machine is not connected.
3. EC PCB is defective.

U1

Close Front Cover

1. Front Cover is open.
2. Front Cover Sensor is disconnected.
3. Front Cover Sensor is defective
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.

U4

Close Finisher

1. Finisher is open.
2. Paper is in the output bin.
3. Stapler is empty.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.

U6

Close Right Cover
(Right Side Cover/Feed Cover1/ADU 
Cover)

1. Right Cover is open.
2. Right Cover Sensor is disconnected.
3. Right Cover Sensor is defective.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. EC PCB connector is disconnected.
7. EC PCB is defective.

Summary of Contents for Workio DP-C265









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Workio DP-C265

Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon FAXPHONE L80 Setup Instructions preview
FAXPHONE L80
Brand: Canon Pages: 8
Canon ImageCLASS 2300 Network Manual preview
ImageCLASS 2300
Brand: Canon Pages: 102
NEC NEFAX - 691 B/W Laser Introduction Manual preview
NEFAX - 691 B/W Laser
Brand: NEC Pages: 20
Oki ES2024 Software Installation Manual preview
ES2024
Brand: Oki Pages: 20
Canon PIXMA MG4120 Getting Started Manual preview
PIXMA MG4120
Brand: Canon Pages: 4
Konica Minolta DiMAGE Scan Elite 5400 II Instruction Manual preview
DiMAGE Scan Elite 5400 II
Brand: Konica Minolta Pages: 38
Xerox WorkCentre BookMark 40 Quick Manual preview
WorkCentre BookMark 40
Brand: Xerox Pages: 12
Olympus CAMEDIA P-200 Installation Manual preview
CAMEDIA P-200
Brand: Olympus Pages: 28
Intermec PB3 Series User Manual preview
PB3 Series
Brand: Intermec Pages: 38
Printek DP-530si Operator'S Manual preview
DP-530si
Brand: Printek Pages: 34
Tally Dascom DP?580 Quick Start Manual preview
DP?580
Brand: Tally Dascom Pages: 2
Rockwell Automation Allen-Bradley ClearMark Quick Start Manual preview
Allen-Bradley ClearMark
Brand: Rockwell Automation Pages: 16
Minolta PagePro 8 Manual preview
PagePro 8
Brand: Minolta Pages: 227
Oce VarioPrint 4110 User Manual preview
VarioPrint 4110
Brand: Oce Pages: 216
Lexmark MX71 series Service Manual preview
MX71 series
Brand: Lexmark Pages: 807
Xerox 8254E User Manual preview
8254E
Brand: Xerox Pages: 244
Lexmark C925 User Manual preview
C925
Brand: Lexmark Pages: 221

Brands by name

Popular brands

Load more brands