Panasonic Workio DP-C265 Operating Instructions Manual Download Page 92

Page: 92 / 102

Chapter 6 Printer Settings

45 - 59

MCP Server Name

Set MCP (Memory Card
Printing) server names.

When “

29 DNS Server

Address

” in the General

Settings is set to “

Yes

”, and

“

50 Use MCP Server

” in

Printer Settings is set to “

Yes

”

Up to 60 characters

MCP Server IP Address

Set IP Address of MCP (Memory
Card Printing) server.

When “

29 DNS Server

Address

” in the General

Settings is set to “

”, and “

Use MCP Server

” in Printer

Settings is set to “

Yes

”

3-digit x 4

0.0.0.0

SD/Direct Use Sort Mem.

Set the direct sort memory.

Off, On

Sort

Set the default sort.

None, Sort, Group,
Shift, Rot. Grp, Rotate

Sort

Staple

Set the default staple.

None, T Centre,
Top L, Top R,
Centre L, Centre R,
Saddle
(R: Right, L: Left,
T: Top)

None

Hole Punch

Set the default hole punch.

None, Left, Top, Right

None

60 - 64

Banner Sheet

Set the page position in banner
sheet.

Print job via PC only (included
MCP/DPS)

Banner Sheet will not be
finished (Sort, Staple, Punch).

Banner Sheet will be counted
with 1 count of monochrome
image.

Print out orientation will be
fixed according to the paper
size.

Portrait : A3, B4, A4

Landscape : A5

This settings is available only
from the machine setting.

None, Top, Last,
Top&Last

None

Banner Sheet Tray

Set the banner sheet tray.

Tray 1, Tray 2, Tray 3,
Tray 4

Tray 1

Key Operator Mode

No.

Parameter

Comments

Selective Item

Standard

Setting

Summary of Contents for Workio DP-C265







































































































Search results

Summary of Contents for Workio DP-C265

Reviews:

Related manuals for Workio DP-C265

Brands by name

Popular brands

Panasonic Workio DP-C265, Operating Instructions Manual

Search results

Summary of Contents for Workio DP-C265

Reviews:

Related manuals for Workio DP-C265

Brands by name

Popular brands