15
Installation Instructions
ATTENTION
Install paper
Lift slightly and pull paper tray out
of copier until it stops.
1
2
Push the bottom plate down until it
locks.
3
Install the paper guide into the
holes that correspond to the paper
size you plan to load.
4
Place paper.
Up to 250 sheets.
Do not fill above.
5
#
Slide the paper guide (front) to
the paper edge.
$
Push the paper tray back into
copier.
Overfill Indicator
1-sided copy
Set-up is completed. Now ready to make a copy.
■
■
■
■
■
Push the paper tray into copier. Plug in the unit and turn on the power. When
the Add Paper Indicator (
J
J
J
J
J
) lights, install paper using the following procedure.
C
When it is necessary to make 2 sided copies, place the output from side 1
face up on the sheet bypass tray then print the second side.
C
If the paper tray is not closed completely, the Add Paper Indicator in the
control panel will light up. In that case, please close the paper tray
completely.
C
For changing paper size, see page 25.
Installation Instructions
