86
CAMERA CONTROL
When a Panasonic combination camera (WV-CW860, WV-CS850, etc.) or a pan-tilt head is connected to the VIDEO IN
connector of the encoder, it is possible to control the camera using the CGI commands.
■
Format
■
Response
■
Item List
Item
Parameter name
Parameter value
Description
Video input channel
CHSEL
1 - 4
To designate VIDEO IN to be controlled
Preset position
PRESET
0 - 64
To move to a preset position set in
advance
0: Home position
1 - 64: Preset position
Horizontal control of the pan-tilt head PAN
–10 - –1
To move left
1 - 10
To move right
Vertical control of the pan-tilt head
TILT
–10 - –1
To move downward
1 - 10
To move upward
Lens
ZOOM
–10 - –1
To move to WIDE
1 - 10
To move to TELE
It will take around 30 ms for one step
increment or decrement of the FOCUS
parameter to adjust focusing.
Auto pan control
ATPAN
on, off
To start/stop auto pan.
Auto focus control
AF
on
Auto focus
Focus control
FOCUS
–10 - –1
NEAR
1 - 10
FAR
It will take around 60 ms for one step
increment or decrement of the ZOOM
parameter to adjust zooming.
HTTP /1.1 204 No Content
CR
LF
Cache-Control: no-cache
CR
LF
Content-Type: text/plain
CR
LF
Content-Length: 0
CR
LF
CR
LF
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=(parameter value)&(parameter name)=(parameter
value)&...&(parameter name)=(parameter value)
HOW TO USE THE CGI COMMANDS
Summary of Contents for WJGXE900 - MPEG2 ENCODER
Page 101: ...101 ...
Page 118: ...118 ...
