Panasonic WJ-NX400K Operating Instructions Manual Download

Page: 124 / 200

124

125

Event action

Description

Mode*

Alarm action

Send a mail that notifies of
an event occurrence

An e-mail notifying of the event and its date & time
(alarm mail) will be sent to registered e-mail
addresses (up to 4).

●

Provide an alarm notification
to a PC according to the
Panasonic alarm protocol
setting

When an event occurs, a notification will be sent to a
PC in accordance with the settings made under
[Panasonic alarm protocol]. (

☞

Page 36, 54)

●

Display the images on a
1-screen when an alarm
occurs

Display the images recorded by the camera
associated with the alarm number on a 1-screen

●

○

: Takes action regardless of the setting,

●

: takes action in accordance with the setting, ×: takes no action

*2 When "On" is selected for the "Attach alarm information" setting of the camera, i-VMD type information will

be displayed in the alarm log. For further information, refer to the operating instructions of the camera in
use.

Stop buzzer beeping

The buzzer sounding to announce an alarm or error can be stopped from the recorder’s front panel.

Step 1

Press the [BUZZER STOP] button.

→

The buzzer will stop.

Note:

• The buzzer can also be stopped by canceling the alarm action or error action. (

☞

Page 125) The [BUZZER

STOP] button does not reset any of the other alarm actions.

[Operation via recorder's main monitor]

Summary of Contents for WJ-NX400K









































































































































































































Search results

Summary of Contents for WJ-NX400K

Reviews:

Related manuals for WJ-NX400K

Brands by name

Popular brands

Panasonic WJ-NX400K, Operating Instructions Manual

Search results

Summary of Contents for WJ-NX400K

Reviews:

Related manuals for WJ-NX400K

Brands by name

Popular brands