58
Configure the settings relating to the user
management [User management]
The settings such as user authentication On/Off, administrator registration and operation levels can be config-
ured on the setup menu - the "Advanced setup" menu - the "User management" page.
The "User management" page has [Basic], [User registration], [Administrator setup] and [Host registration] tabs.
Configure the basic settings relating to user management
[Basic]
The settings relating to login when using the mouse, user authentication for network operations, and user levels
can be configured on this tab.
■
Operation
Configure the settings to enable auto login when turn-
ing on the recorder.
[Auto login]
Select "On" or "Off" to determine whether or not to
activate the auto login function.
On: Logs in to the recorder automatically.
Off: Does not log in to the recorder automatically.
Login is required when operating the recorder
from the logout status.
Default:
On
[Auto login user]
When "On" is selected for "Auto login", the users reg-
istered as auto login users in this setting can log in to
the recorder automatically. An auto login user should
be one of the users registered in the recorder.
Default:
(Administrator)
[Quick login]
Select "On" or "Off" to determine whether to enter or
select the user name.
Off: User name needs to be entered.
On: Login by selecting a displayed user name.
Default:
Off
[Auto logout]
Set the time to wait until auto logout when no opera-
tions are made while displaying live images.
Off: Does not logout to the recorder automati-
cally.
After 1 min/ After 3 mins/ After 5 mins/
After 30 mins
Default:
Off
Note:
• When "On" is selected for "Auto login", the user
will not be logged out automatically even if other
values than "Off" is selected for "Auto logout".
When logout is performed (
☞
will be automatically performed by the user regis-
tered in "Auto login user".
• To prevent inappropriate operations, it is recom-
mended to select settings other than "Off" for
"Auto logout".
■
Network
Determine whether or not to require user authentica-
tion for operating the recorder from a PC.
[User authentication]
Select "On" or "Off" to determine whether or not to
authenticate the user.
On: Login followed by user authentication
Off: Login without user authentication
Default:
On
[Host authentication]
Determine whether to enable or disable the host
authentication.
On: Login followed by host authentication.
Off: Login without the host authentication.
Default:
Off
[Setup via recorder's main monitor]
