background image

9

Configuration of each setting item in the setup menu should be completed in advance to use this recorder.
The setup menu has the following levels for the setting items. On "Easy Start", the minimum settings required to operate the 
recorder will be performed, but other settings will remain default. On the [Basic setup] or [Advanced setup] page, the settings can 
be customized in accordance with a variety of operational modes.
The following is the example of the setup menu that describes the features and operations.
The setup menu will be displayed when clicking the [Setup] button (

 page 7) at the upper right corner of the operational screen 

on the main monitor.
The buttons of the setup pages will be displayed on the left column of the setup menu.

Setup menu

  [Home] button

 

It is possible to return to the top screen (

 page 7) of 

the setup menu from any setup page.

  Setup menu panel

 

Displays buttons of the setup pages.

  [Easy Start] button

 

It is possible to configure the minimum settings required 
to operate the recorder, such as date & time and cam-
era registration.

  [Basic setup] – Setup page buttons

 

Each "Basic setup" page will be displayed.

  [Advanced setup] button

 

The buttons to open the corresponding setup pages of 
the "Advanced setup" menu will be displayed. When 
clicking this button again, the buttons will be hidden.

  [Advanced setup] – Setup page buttons

 

Each "Advanced setup" page will be displayed.

  Hierarchical display

 

The name of the current setup page will be displayed in 
the hierarchy. The tab name will also be included.

  Setup page

 

Displays each setup page. If the current setup page is 
composed of two or more tabs, it is possible to change 
the page display by clicking the tabs.

  [Exit] button

 

Applies the settings to the recorder and closes the setup 
menu to return to the operational screen (

 page 11).

Except for some cases, the descriptions of this document 
follow the hierarchical display and setup pages.

Important:

•  If the settings are applied, all login users will be forcibly 

logged out.

Introduction

 (continued)

Summary of Contents for WJ-NX200K





































Reviews: