23
4
Turn on the devices
(continued)
Step 3
If the license for the recorder has not been registered
yet, the message asking you to register the "Registration
Key" will be displayed after the completion of the system
check and the administrator registration.
If the "Registration Key" for the recorder has not been
registered yet, register the "Registration Key" by following
the procedures on page 26.
Note:
• If the "Registration Key" for the recorder is once
registered, the message asking you to register the
"Registration Key" will not be displayed from the next
time.
(When turn off the power of the recorder)
Follow the procedure below to turn off the power.
Step 1
During recording, set "Recording mode" on
[Advanced setup] tab under "REC & event" under
[Basic Setup] from Setup menu to "Off" to stop all
recordings.
(
☞
Operating Instructions (PDF))
Step 2
Unplug the power plug from the power outlet after
confirming that the [REC] indicator is off.
→
[OPERATE] indicator on the front of the recorder will
go off.
Important:
• Remove the plug from the outlet if not operating the recorder for a long period.
Note:
• Be sure to perform the operation to start recording (select "On" for "Recording mode") after turning on the power
of the recorder again.