Play images selected from logs
Operation during playback
Status display
• Clicking the capturing image button while playback is paused will save a still
image (JPEG) on the SD memory card.
• The playback status display area shows the playback status of recorded images.
During fast forward/fast reverse playback, it will display the playback speed (x2,
x4, x8, x16, x32, x48)
• The playback speed will change each time the fast forward/fast reverse button is
clicked.
• Clicking the [Go to last] button will make playback skip to the latest recorded
images. The starting point is around 30 seconds before the date & time of the lat-
est recorded images.
The status display panel displays the statuses of the recorder. In the event that the recorder enters several statuses at the same time, these
are displayed in their order of priority. If both statuses have the same priority, the one that occurred last will be displayed. Refer to the
Operating Instructions (PDF) for status other than described below.
Status
Description
Example
Priority
Live
Live images are being displayed.
5 (Low)
Playback
Recorded images are being displayed.
5
Copying
Data is being copied. Copying progress is displayed in %.
4
Formatting SD
SD memory card is being formatted.
4
Formatting HDD
HDD is being automatically formatted.
3
In the alarm state
Indicates an alarm occurrence. Detailed information of the
alarm will be displayed.
2
In the error state
Indicates that an error has occurred. A detailed description
of the error content will be displayed.
1 (High)
[Alarm] button
Capturing image button
Playback status display area
[Error] button
<When an error (alarm) has occurred>
A remedy will be displayed in the "Error log". Resolve the problem by following the
instructions given.
During playback, the playback panel changes as shown below. It contains buttons for playback operations such as playing recorded
images, pausing, fast forward and playing next image. Refer to the Operating Instructions (PDF) for details.
1
Click the [Alarm] button or [Error] button on the status display
panel.
2
3
Click the [Log] button.
Select the line with the desired date & time by clicking it, and click
the [Play] button on the playback operation panel.
