3. Connect between the main and RAID boards with 2
cables that belong to the main board.
4. Detach the cable from the cable clamp to unbind it, and
pass the cable through the cable clamp as shown in
the illustration below.
3
INSTALLATIONS
1. Unscrew WJ-ND300 (2 screws from top, 4 screws from
sides, and 5 screws from rear) and remove the top
cover.
2. Disconnect all of the HDD cables.
HDD cables
To main board
To RAID board
Hold the
cables using
the cable
clamp.
