http://panasonic.net/security/
Printed in Japan (2A-001BL)
Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– Axis is a registered trademark of Axis Communications AB.
– "Super Dynamic", "SD
II
", "SD
III
" and "i-Pro" logos are trademarks or registered trademarks of
Panasonic Corporation.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that
reside on the network.
DISTRIBUTED BY:
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• All product pictures are NTSC models.
ARARM
ARARM
SUSPEND
OPERATE
ERROR
TIMER
REC
LINK1
LINK2
HDD1
HDD2
HDD3
HDD4
ESC
SET
PULL
Specifications
TV System
NTSC
PAL
Supported
Supported Cameras
Panasonic i-Pro series Network cameras. (Contact Panasonic for BB series and Axis
®
cameras)
Cameras
Supported Image Format H.264, MPEG-4 (Specific cameras), JPEG, M-JPEG
Supported Image Resolution 1,280 x 960, 960 x 720, 640 x 480, 320 x 240 (Depending on the camera)
Maximum Number of Cameras 32
Recording
Recording Mode
Manual recording, Scheduled recording, Emergency recording,
External timer recording, Event recording
Pre-alarm Recording
Up to 60 minutes. Dedicated HDD for Pre-alarm is required
Scheduled Recording Mode 4 programs, 6 time zones/day, Independent setup for each day of the week.
Frame Rate/Camera
Up to 30 ips (Depending on the camera and Network)
Browser
Camera Control
Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode
GUI
REC/Playback Control
REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record, Prev Image,
Next Image, A-B Repeat, Goto Date, Goto Last (5 sec. ~ 5 min.), Text display
Search Mode
Search criteria: Time date, Event type, Camera number, Text ON/OFF
Display Mode
Spot/Quad (8 patternes)/Spot Sequence/Quad Sequence (Live, Playback)
Camera Grouping
8 groups each with 16 characters title
Image Download
Recorded data of selected camera and time range (up to 20 min.) can be
downloaded to a PC. Viewer software can be downloaded separately.
SD Memory
Image data in the SD memory installed in the selected camera
Data Download
can be transferred to the recorder.
Copy
Recorded data of selected cameras and time date range can be copied to the COPY partition.
Camera Title
On the browser, Up to 16 characters
Clock Display
On the browser. Time: 12H/24H, Date: 3 formats
Alarm Control
Reset, Suspend
Digital Zoom
Up to 4 times
Text Attachment
Free comment can be attached for each record and reviewed at later time. Up to 200 characters
System Log
Operator access (100), Network error (1,000), Error (100), Event (750)
Time Synchronization
Terminal (Master or Slave), NTP (Client)
Summer Time
User definable (using menu setup)
GUI / System Setup Language English, French, Italian, Spanish, German, Russian, Chinese, Japanese
Supported OS
Microsoft
®
Windows
®
7 Professional 64 bit/32 bit & Windows
®
Internet Explorer
®
8.0 32 bit,
and Browser
Microsoft
®
Windows Vista
®
32 bit SP1 & Windows
®
Internet Explorer
®
7.0,
Combination
Microsoft
®
Windows
®
XP Home/Professional SP3 & Windows
®
Internet Explorer
®
6.0
The language of OS must be the same as selected GUI language.
Required PC JPEG/
CPU: Intel
®
Pentium
®
4 3.0 GHz or faster, RAM: 1 GB or more,
MPEG-4
VRAM: 128 MB or more (Min. 64 MB), Microsoft
®
DirectX
®
9.0c or later
H.264
CPU: Intel
®
Core
TM
i7-920 or faster, RAM: 3 GB or more,
VRAM: 128 MB or more (Min. 64 MB), Microsoft
®
DirectX
®
9.0c or later
Alarm/
Alarm Source
16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol
Event
Event Mode
Alarm/Activity/OFF
Alarm Action
Alarm recording, E-mail notification, Alarm message, Camera positioning,
FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator
Alarm Control
Reset, Suspend
Event Log
750
Network
Network Interface
Camera port: 10Base-T/100Base-TX (RJ-45) Client port: 10Base-T/100Base-TX (RJ-45)
Maintenance port: 10Base-T (RJ-45)
Maximum Band Width
Total 97 Mbps
Bandwidth Control (Client Port) 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited
Supported Protocol
TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP
Upon Alarm or Warning
No. of Client at a Time
8
User Registration
Up to 32 users
User Level
4 Levels (Programmable)
Partitioning
User - Camera (View only, View & Control, No Access)
Security Method
User authentication (ID and Password), Host authentication (IP address), Alteration detection
External
Alarm Connector Alarm
Alarm input 1 ~ 16
*1
, Alarm output 1 ~ 7
*2
Interface
(25pin D-sub)
Alarm/
Alarm
Alarm output 8 ~ 16
*2
Alarm suspension input
*1
, Alarm reset input
*1
Control
Control
Emergency recording input
*1
, Power outage detection input
*1
,
Connector
External recording mode switching
*1
, Power outage recovery completion output
*3
,
(25pin D-sub)
Time adjustment input/output
*4
, +5 V output
*5
Error/
Network error output
*2
, Available disk space warning output
*2
,
Warning
HDD error output
*2
, Camera error output
*2
, Error output
*2
External Strage
High-speed serial interface 480 Mbps (theoretical value) for WJ-HDE300 Extension Unit
RS-232C
For servicing purpose only
HDD
Type
1x 3.5 inch 250 GB HDD (Factory default),
Up to 4x 2 TB HDDs can be installed. (Contact Panasonic for detail)
Maximum Capacity
56 TB (with 6x WJ-HDE300 Extension Units, 4x 2 TB HDDs installed in each unit)
RAID
RAID5 supported (with WJ-NDB301 RAID5 Board)
Partitioning
Normal/Event/Copy
Viewer
Playback Control
Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image
Software
Additional Functions
Alteration detection, Save as JPEG, Two times zoom, Print
Supported OS, Language Same as browser GUI, Language of the software will be English
Admin Software
Supported OS, Language Same as browser GUI, Language of the software will be English
Quick IP Setup
Supported OS,
Same as browser GUI, Language of the software will be English
Software
Language
TV System
NTSC
PAL
General
Safety/EMC Standard
UL (6500), FCC (Part15 ClassA),
CE (EN60065, EN55022 ClassB, EN55024),
Specifications
C-UL (E60065), DOC (ICES003 ClassA) GOST (GOST R 51558)
Power Source
120 V AC, 60 Hz
220 ~ 240 V AC, 50 Hz
Power Consumption
approx. 85 W
Ambient Operating Tempe5
°
C ~ +45
°
C (41
°
F ~ 113
°
F)
Ambient Operating Humidity 5 % ~ 90 % (without condensation)
Maximum Operating Altitude 2,000 m (6,500 feet) above sea level
Dimensions
420 mm (W) x 88 mm (H) x 350 mm (D) (16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D))
(excluding rubber feet and projections)
Weight
8.3 kg (18.3 lbs.)
Part Names and Functions
Appearance
ARARM
ARARM
SUSPEND
OPERATE
ERROR
TIMER
REC
LINK1
LINK2
MAINTENANCE
HDD1
HDD2
HDD3
HDD4
ESC
SET
PULL
Network Disk Recorder
WJ-ND
10/100BASE-T
EXT ST
ORAGE
SERIAL
PC
CAMERA
SIGNAL GND
POWER
AC IN
ALARM/CONTROL
ALARM
CAUTION
AT
TE
NT
IO
N
320(12-5/8")
480(18-7/8")
465(18-5/16")(Mounting Pitch)
420(16-9/16")
88(3-7/16")
10.5
(7/16")
76(2")
(Mounting Pitch)
88
(3-7/16")
350(13-3/4")
270(10-5/8")
40(1-9/16")
8.8(3/8")
MAINTENANCE
Front View
Rear View
External Storage Connector
Client PC Port
Camera Port
Serial Connector (for maintenance purpose)
Alarm/Control Connector
Alarm Connector
Signal Ground Terminal
Power Switch
Power Cord Inlet
Operate Indicator
Alarm Suspension Indicator
Alarm Indicator
Error Indicator
Timer Indicator
Recording Indicator
Camera Link Indicator
PC Link Indicator
HDD Access Indicators
LCD
Arrow Button
Escape Button
Set Button
Maintenance Port
10/100BASE-T
EXT STORAGE
SERIAL
PC
CAMERA
SIGNAL GND
POWER
AC IN
ALARM/CONTROL
ALARM
Unit: mm (inches)
*1: Non-voltage make contact, +5 V pull-up 150
Ω
*2: Open collector output, 24 V max., –100 mA
*3: High (+5 V ~ +12 V, 6.3 mA maximum) *4: 52 k
Ω
, 5 V pull-up, –100 mA / make contact *5: 200 mA at maximum
