Panasonic WJ-HD616K, Installation Manual, Page: 27 / 156

27
➜
Operations flow
The operation flow of the recorder is as follows.
Rack mounting
(
+
Page 28)
z
➜
Connections
(
+
Page 29)
x
➜
Installation of the hard disk drives
(
+
Page 52)
c
➜
Determination of the operational mode
(
+
Page 54)
v
➜
Startup
(
+
Page 55)
b
➜
Configuration of the settings for the
quick setup.
(
+
Page 63)
n
z
Install the recorder in the rack.
Go to step
x
when not installing it in the rack.
x
Connect the recorder to each device.
When using an optional extension unit, install hard disk
drives in the optional extension unit (WJ-HDE400) and
connect to the recorder. (
+
Page 33)
c
Install hard disk drives in the recorder.
When using an optional RAID board (WJ-HDB601) or an
optional DVD drive (WJ-HDB611), install it.
v
Reboot the recorder after determining the operational
mode if necessary such when using the RAID function.
When not installing an optional RAID board
(WJ-HDB601), go to step 5.
b
Turn on the power of the recorder.
When using optional extension units (WJ-HDE400), turn
the power of all the extension units before turning on the
power of the recorder.
n
Configure the settings such as the current time and date
setting, schedule recording settings, etc.
➜
Configuration of the recording area
setting of the hard disk drives.
(
+
Page 126)
m
m
Change the recording area setting or format the record-
ing area of the hard disk drive if necessary such when it
is necessary to assign the event recording area to the
hard disk drive.
➜
Setup
(
+
Page 57)
,
,
Configure the settings required for operation.
➜
Start operation
Replacement/addition of hard disk
drives
(
+
Page 133)
.
The hard disk drives can be formatted/replaced without turn-
ing off the power of the recorder even when one of them
becomes faulty.
When necessary