Plug connector
4. Replacement Guide
4. Install new night lamp (MAX 4W incandescent lamp) and
new fluorescent lamps (Maxlite MLS13GU35,13W) as
shown in step 1 ,step 2 and step 3 of (Fig.4)
Fig.2
WARNING
Remove dust and dirt from light kit cover assembly
and lens, before replacing the lamps.
CAUTION
Fig.3
3
Lens
3. Remove the fluorescent lamps (Maxlite MLS13GU35,13W)
and night lamp as shown in step 1 ,step 2 and step 3 of (Fig.3)
2. Remove the screw as shown in step 1 of (Fig.2)
Remove the light kit cover assembly as shown in step 2 of (Fig.2)
1. Remove grille by pulling down one mounting spring. Remove
plug connector then pull down the other mounting spring.
(Squeeze mounting spring and pull down carefully) (Fig.1)
5.Install light kit cover assembly.(Fig.5)
3
Fig.4
Fig.5
Secure screw
(M4X8)
Fluorescent
lamp
Night lamp
Light kit cover
assembly
INSTALLATION
Fluorescent
lamp
Night lamp
Light kit cover
assembly
Remove screw
(M4X8)
Disconnect power source before working
on unit.
Make sure the temperature of lens and lighting
unit has cooled down before maintenance
(cleaning) or replacement of lamp.
This is a pin type lamp base and the lamp’s
glass is fragile.To remove,pull out carefully.
4W night lamp has threaded base,Remove
by turning counterclockwise.
8. Insert the other mounting spring into the
slot as shown and mount grille to fan body.
(Fig.8)
7. Insert the grille mounting spring on the
wiring side into the slot, and insert the plug
connector into the housing of lighting
unit.(Fig.7)
Fig.8
Grille
Ceiling
Gloves
Mounting spring
lighting unit
Insert Plug connector
Mount grille carefully so that lead
wire of lighting unit will not pinched.
CAUTION
Rib
Claw
Fig.7
Gloves
Ceiling
Grille
Plug connector
lighting unit
Insert Plug connector
Rib
Claw
Fig.1
Gloves
Ceiling
Grille
MAINTENANCE(REPLACEMENT OF LAMP)
17
