PROGRAMMABLE DISPLAY WHA1 Advanced Model
6
2.5 Ethernet Port
The Ethernet port have two LED indicators for status. Please see description below.
2.6 DISPOSE OF BATTERIES
These devices are equipped with rechargeable Lithium battery, not user-replaceable.
When disposing of this product, remove and dispose of the batteries according to the following
procedures.
2.6.1Detaching method of batteries
■
AWHA1C050
1. Remove the main unit case mounting screws and remove the case.
2. Disconnect the cable connected to the board from the connector. Alternatively, use a nipper to cut
the cable.
3. The battery is located on the back of the board as shown in the illustration, using the nipper
remove the battery from the board
■
AWHA1C070, AWHA1C101, AWHA1C156, AWHA1C215
1. Remove the main unit case mounting screws and remove the case.
2. The battery is located on the back of the board as shown in the illustration, using the nipper
Green
Yellow
Remarks
ON
OFF
No LAN cable connected
BLINK
ON
Link at 100 Mbit/s
BLINK
OFF
Link at 10 Mbit/s
(Note 1)
Dispose of batteries according to local regulations.
(Note 2)
When detaching the battery, be sure to disconnect the power cable so that
power can not be supplied to the device. There is a risk of electrical shock.
Battery
