Panasonic WH-MDC05J3E5, Operating Instructions Manual, Page: 32 / 80

32
Menus
For installer
Menu Default Setting Setting Options / Display
Water temp. for cooling ON Direct
10 °C
Set temperature for
Cooling ON
•
If 2 zone system is selected, temperature set point must input for Zone 2.
• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.
T for cooling ON
5 °C
Set T for cooling ON
* This setting will not
available to set when
pump fl owrate set to
Max. duty.
6.3
*
1,
*
2
Auto
Automatic switch from Heat to
Cool or Cool to Heat.
Outdoor temperatures for switching from Heat
to Cool or Cool to Heat.
Outdoor temp. for (Heat to Cool) /
Outdoor temp. for (Cool to Heat)
Outdoor temp. for (Heat to Cool)
15 °C
Set outdoor
temperature for
switching
from Heat to Cool.
Outdoor temp. for (Cool to Heat)
10 °C
Set outdoor
temperature for
switching
from Cool to Heat.
6.4
Tank
Setting functions for the tank.
•
Available only if connected to
the tank.
Floor operation time (max) /
Tank heat up time (max) /
Tank re-heat temp. /
Sterilization
•
The display will show 3 functions at a time.
Floor operation time (max)
8:00
Maximum time for
fl oor operation
(in hours and minutes)
*
1
The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*
2
Only displayed when COOL mode is unlocked (This means when COOL mode is available).