157
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Installation
6
Hydrokit J or H generation
2
1
2
3
6.5.3
Outdoor units and mono-bloc units
Removing and replacing the front plate
Carry out the following steps to remove the front plate i.e. the cover of the connection box on the
front side of the outdoor unit or mono-bloc unit:
1.
Remove the fixing screws (
1
) on the front plate (
2
).
2. Push the front plate downwards (
3
), to release the latches.
3. Then pull the front plate to yourself to remove it.
4. To replace the front plate, proceed in the reverse order.
Outdoor units
Mono-bloc units
1
2
1
3
1
3
2
1
1
A WH-UX16HE8 outdoor unit is shown as an example.
For other outdoor unit types*, proceed similarly as
appropriate.
A WH-MDC16H6E5 mono-bloc unit is shown as an
example. For other mono-bloc unit types*, proceed
similarly as appropriate.
* cfr.
