11
Item
Unit
Indoor Unit
Protection Device
A
Residual Current Circuit Breaker (30)
Expansion Vessel
Volume I
10
MWP bar
3
Capacity of Integrated Electric Heater / OLP TEMP
kW / °C
3.00 / 80
Tank Volume (Spec / Nett)
L
200 / 185
Max. Tank Water Set Temperature
°C
65
Tank Coil Surface
m
2
1.8
Maximum Working
Pressure
Heat / Cool
Bar
3.0
Tank Circuit
Bar
10.0
Operating Pressure
Tank Unit
Bar
3.5
Expansion Relief Valve
Bar
8.0
Expansion Vessel Pre-charge Pressure (DHW Circuit)
Bar
3.5
Pressure Reducing Valve Set Pressure (DHW Circuit)
Bar
3.5
Pressure Vessel
Material
En-1.4521
Volume L
185
Design Pressure
Bar
10
Heat Exchanger
Material
EN-1.4162 / EN-1.4521
Diameter mm
22
Thickness mm
0.8
Surface Area
m
2
1.8
Total Length
m
25
Anode
Material
Aluminium
Diameter mm
20
Length mm
1000
Note:
Cooling capacities are based on outdoor air temperature of 35°C Dry Bulb with controlled indoor water inlet
temperature of 12°C and water outlet temperature of 7°C.
Heating capacities are based on outdoor air temperature of 7°C Dry Bulb (44.6°F Dry Bulb), 6°C Wet Bulb
(42.8°F Wet Bulb) with controlled indoor water inlet temperature of 30°C and water outlet temperature of 35°C.
Specifications are subjected to change without prior notice for further improvement.
* Above 55°C, only possible with backup heater operation.
