33 (E)
CONTENTS
Setup menus
SYSTEM menu
No./Item
Description
The underlined items indicates the initial setting.
00
WFM SEL
This selects the signal to output from the
VIDEO OUT 2 connector.
0000
CTL :
The CTL signal is output.
0001
TC :
The TIME CODE signal is
output.
0002
VIDEO :
The VIDEO OUT signal is
output.
0003
RF_L :
The PB L RF signal is output.
0004
RF_R :
The PB R RF signal is output.
0005
ENV_L :
The PB L ENV signal is output.
0006
ENV_R :
The PB R ENV signal is output.
<Notes>
O
The settings can be changed at any time
regardless of the setup menu item No. 30
(MENU LOCK) setting.
O
During normal playback, the output signals
have levels which are virtually identical to the
values given below under a 75
Ω
termination.
CTL: 0.1 to 0.3 Vp-p
TC: 0.6 Vp-p
VIDEO: 1.0 Vp-p
10
ENCODER
SEL
This selects whether the video output signal
is to be adjusted with the VTR or with the
external encoder remote control.
0000 REMOTE :
Video output signals are adjusted with the
external encoder remote control.
0001
LOCAL :
Video output signals are adjusted with the
VTR.
11
SYS SC
COAR.
Coarse adjustment of system phase:
90° units
0000
0
0001
90
0002
180
0003
270
12
SYS SC FINE
Fine adjustment of system phase:
Variable range ±45° or more
–: Advanced, +: Delayed
0000
–128
:
:
0128
0
:
:
0255
127
13
SYS H
System phase adjustment:
74 ns steps
–: Advanced, +: Delayed
0000
–128
:
:
0108
0
:
:
0216
127
No./Item
Description
14
SCH COARSE
SCH phase adjustment:
90° units
(The SC phase changes but the H phase does
not change.)
–: Advanced, +: Delayed
0000
0
0001
90
0002
180
0003
270
15
SCH FINE
SCH phase adjustment:
Total variable range: ±45° or more
(The SC phase changes but the H phase does
not change.)
–: Advanced, +: Delayed
0000
–32
:
:
0032
0
:
:
0064
32
16
AV PHASE
This adjusts the audio output phase with
respect to the video output:
20.8 µs steps
–: The audio output phase is advanced with
respect to the video output.
+: The audio output phase is delayed with respect
to the video output.
0000
–128
:
:
0128
0
:
:
0255
127
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.
