Panasonic VQT1T63 Operating Instructions Manual Download

Page: 191 / 210

- 191 -

Others

Troubleshooting

First, try out the following procedures (

P191

–

202

•

The battery is not inserted correctly.

(P18)

•

The battery is exhausted.

•

Charge the battery.

•

Is the [EXT. VIEWFINDER]

(P126)

set to [ON]?

Press [DISPLAY] to switch to the LCD monitor.

•

Is [AUTO LCD OFF]

(P31)

of the [ECONOMY] mode active?

Press the shutter button halfway to cancel these modes.

•

The battery is exhausted.

•

Charge the battery.

•

The battery is exhausted.

•

Charge the battery.

•

If you leave the camera on, the battery will be exhausted.

Turn the camera off frequently by using the [ECONOMY] mode etc.

(P31)

•

Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to

charge the battery or charging may remain incomplete.

•

Are the terminals of the charger or battery dirty?

Wipe off the dirt using a dry cloth.

If the problem is not resolved,

it may be improved by selecting [RESET]

(P32)

on the

[SETUP] menu when taking pictures

Battery and power source

The camera cannot be operated even when it is turned on.

The LCD monitor turns off while the camera is turned on.

The camera turns off immediately after it is turned on.

The [CHARGE] lamp flashes.

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands