Panasonic VQT1T63 Operating Instructions Manual Download Page 19

Page: 19 / 210

- 19 -

Preparation

:Close the card/battery door.

:Slide the release lever in the direction

of the arrow.

•

If the card/battery door cannot be completely

closed, remove the card, check its direction and

then insert it again.

Note

•

Remove the battery after use. Store the removed battery in the battery carrying case (supplied).

•

Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the

settings on the camera may not be stored properly.

•

The supplied battery is designed only for the camera. Do not use it with any other equipment.

•

Before removing the card or battery, turn the camera off, and wait until the status indicator has

gone off completely. (Otherwise, this unit may no longer operate normally and the card itself

may be damaged or the recorded pictures may be lost.)

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands