Flash Time
Description
Available Settings
Default Setting
Determines the flash time.
•
Set this parameter to match the specification of the TEL
line.
900 ms
700 ms
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms
80 ms
700 ms
Pause Time
Description
Available Settings
Default Setting
Determines the length of the dialing pause inserted when
[REDIAL/PAUSE]
is pressed.
3 s
5 s
3 s
TEL Line Level Reduction
Description
Available Settings
Default Setting
Determines whether the incoming TEL line signal level is
reduced. Set this feature to "
On
" if the volume of your voice
heard from the speaker is too loud.
•
When set to "
On
", the other party’s voice will be slightly
quieter.
•
We recommend setting this feature to "
On
" when
establishing conference calls that use the TEL line.
On
Off
Off
IP Network Settings
Consult your system administrator for the appropriate settings.
IP Address Mode
Description
Available Settings
Default Setting
Determines whether the unit’s IP address is assigned
automatically (DHCP) or manually (static).
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
DHCP
Static
Static
54
Operating Instructions
Document Version 2011/06
Programming the Unit
