Daytime or when it is bright
At night or when it is dark
Motion detection sensor
Heat sensor
R
The brightness level is automatically determined by the camera when viewing images.
A timer can be configured to switch the modes between day and night modes at specified times. (See the [Day
and night switch] setting in the Operating Instructions of the Video Intercom System.)
R
The settings can be configured to match the installation environment by only operating the motion detection sensor
and heat sensor at certain times, for example only during the day or only at night. (See the [Heat sensor
detection] and [Motion detection] settings in the Operating Instructions of the Video Intercom System.)
Controls
B
E
G
C
D
A
F
Rear view
J
H
I
Indicator lamp (See the following explanation.)
LED lights
R
Automatically lights when it is dark and the camera is monitoring or when sensors are operating. (The LED
lights are designed to be used as warning lights for intruders and are not meant to be used for illumination.)
Lens cover
R
Contains a lens and a brightness sensor. (See the following explanation.)
Sensor range cap (standard type)
R
4 types of lens caps (accessories) can be fitted as required. (
®
Installation Guide)
Heat sensor
R
Detects changes in temperature. (
®
page 4)
Microphone
Speaker
Safety wire
Heat sensor lever
R
Used to change the angle of the heat sensor. (
®
Installation Guide)
Register button (behind the register button cover)
R
The register button is located behind the register button cover.
Used when registering the camera to the main monitor. (
®
Installation Guide)
Brightness sensor
Determines whether to light the LED lights by detecting the brightness of the surrounding area.
6
