VL-V900
VL-V700
VL-V701
VL-V703
Model number and name
Dimensions
Power source
Power consumption
Dimensions (H x W x D)
(Excluding protruding sections)
Weight
Operating environment
Display
Image sensor
Viewing angle
(1/4 inch) CMOS sensor (approx. 1M pixels)
4.3-inch monochrome display (white backlit LCD)
Display language
English
—
—
—
—
—
—
—
—
2.0 kg
400 g
Power supply unit (VL-PS240) 24 V DC, 0.2 A
Standby: Approx. 1.9 W
During operation: Approx. 4.5 W
Standby: Approx. 3.5 W
During operation: Approx. 3.7 W
Standby: Approx. 1.2 W
During operation: Approx. 2.0 W
Standby: Approx. 0.4 W
During operation: Approx. 4.4 W
Standby: Approx. 1.5 W
During operation: Approx. 1.5 W
Power supply unit (VL-PS240: AC 220-240 V)
108.5 x 210 x 52.5 mm
Lobby Station
Control Box
Distribution Box / Repeater Box
Extension Box
VL-V702
Lift Cotrol Box
Ambient temperature: Approx. -10 °C to +55 °C,
Relative humidity (non-condensing): up to 90 %
Ambient temperature: -10°C to +50°C, Relative humidity (non-condensing): up to 90 %
(indoor use only)
373 x 179 x 2.5 mm (excluding sections embedded
into the wall) Flush mounting only
Horizontally: Approx. 170˚, Vertically: Approx. 115˚
*1 Up to 18 Lobby Stations can be installed by adding Extension Boxes. *2 Water resistance is only assured if the Door Station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
*3 Text logs: More than 90,000 items / Images: Up to 90,000 images
Up to 28
Up to 15
Up to 3
Up to 3
(Up to 18*
1
)
Talking method
Hands-free
Minimum illuminance required
1 lx (within approx. 50 cm from the camera lens)
Lighting method
White coloured LED lights
IP rating / IK rating
IP55*
2
/ Compliant with IK07
Installation method
Flush mount (flush mounting box supplied)
Wall implanted (or can be installed on DIN rail)
External material
Aluminium / stainless steel
Flame retardant ABS resin
Supported functions
Support for electric lock releasing (entrance unlocking) x 1
VIDEO-IN (recommended Panasonic CCTV) x 1
Guidance (simple usage for visitors)
Night colour vision (white coloured LED lights)
Heat sensor: The backlight of the display and buttons are
turned on when a visitor is detected.
Display the resident’s names
Unlock with PIN-code
Extend Lobby Stations
Supported control methods
•
1:1 control (Relay signalling)
•
Binary control
Dip switch
•
Mode change
(Distributor mode / Repeater mode)
•
Termination setting
(Normal / Terminal)
•
ID setting
(1-7 by binary number)
USB connection
(provide PC application / English)
•
date and time setting
•
set the room number with the monitor
•
estimate the status of the equipment
in the system
•
operation setting
(terminal, pass code, and so on.)
SD Card (SD / SDHC / SDXC): Log function*
3
VIDEO OUTPUT (NTSC up to 1)
RJ-11: connect with PBX system
Power
Supply
Unit
Power
Supply
Unit
Power
Supply
Unit
Power
Supply
Unit
Power
Supply
Unit
Specifications
Trademarks and registered trademarks
- SD, SDHC and SDXC are trademarks of SD-3C, LLC.
Important
- Safety Precaution: carefully read the operating instructions and installation manual before using this product.
• The actual product may vary slightly from photograph.
• All pictures of the LCD display are simulated.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
DISTRIBUTED BY :
MG-DHPL016EN 1607TD/ZZZ-1
Installing the Lobby Station
Installing the Control Box, Dirstribution Box, Lift controler, Extension Box
Installing the Power Supply Unit
Installing the VL-MV26 Main Monitor
VL-MV26
Model number and name
Dimensions
Power source
Power consumption
Weight
Operating environment
Display
3.5-inch, colour / QVGA (320x240 pixel)
Display language
English
330 g
Power supply unit (VL-PS240) 220-240 V AC
Standby: Approx. 1.2 W, During operation: Approx. 8 W
Power
Supply
Unit
169
29
129
Main Monitor
Ambient temperature: Approx.0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Picture recording
Up to 30 images (up to 30 visitors, 1 shot per visitor)
External material
Flame retardant ABS resin
Supported functions
•
1 door bell input
•
Electric lock release (public)
•
Monitor security camera
•
Connecting to a PBX system
•
Emergency call
Installation position
Side view
Approx.
2300 mm
Approx. 115°
Approx.
500 mm
Approx.
Approx.
m
m
0
0
5
1
.
x
o
r
p
p
A
Centre of
the Camera
lens
1600 mm
700 mm
Top view
(view when looking from above)
Approx. 500 mm
Approx. 170°
Image range
Front view
353 mm
159 mm
Side view
80 mm
Mounting on a DIN rail
Attaching directly to a wall
1
2
Mount the control box on the DIN rail
using the hooks .
1
2
Attach the unit to the wall securely using
the 2 supplied screws .
3
3
AC cable
DC cable
45 mm
7 mm
25 mm
7 mm
Front view
the
screws
Top view
Bottom view
AC
cable
binder
hole
AC IN terminal
DC
cable
binde
hole
DC OUT terminal
83.5 mm
Screws
Wall
Wire (Not included)
Mounting bracket
NP
NP
NP
NP
DC IN
Distribution Box
Main Monitor
(up to 20 per Distribution box)
Door Bell
POWER SUPPLY UNIT
NP: Non-polarised
