Specifications
VL-MVN511
VL-V522L
VL-PS241
VL-RLY1
Model number and name
Main Monitor Station (Main monitor)
Door Station (Doorphone)
Power Supply Unit
* indoor use only
Relay Box
Dimensions
(mm)
Power source
Power supply unit (VL-PS241)
24 V DC, 0.5 A
Power supplied by the main monitor
Input: 220-240 V AC, 0.2 A ( 50 / 60 Hz )
Output: 24 V DC, 0.6 A
Power supplied by the main monitor
Power consumption
Standby: Approx. 1.8 W
During operation: Approx. 10 W
-
-
-
Dimensions (H x W x D)
(Excluding protruding sections)
186 x 161 x 23.5 mm
131 x 99 x 36.5 mm
104 x 100 x 54 mm
92 x 78 x 38 mm
Weight
485 g
200 g
215 g
130 g
Operating environment
Ambient temperature: Approx. 0 °C to +40 °C,
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. -15 °C to +55 °C,
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
Display
5-inch, wide colour / WQVGA (480 x 272 pixel)
-
-
-
Display Language
English, Arabic
-
-
-
Talking method
Hands-free
-
-
-
Frequency range
Wi-Fi: (IEEE 802.11 b/g/n 2.4 GHz)
-
-
-
Viewing angle
-
Horizontally: Approx. 87°
Vertically: Approx. 66°
-
-
Installation method
Wall mount (mounting bracket supplied)
Surface mount (mounting base supplied)
Wall mount or attach to DIN rail
Wall mount or attach to DIN rail
Minimum illuminance required
-
1 lx (within approx. 50 cm from the camera lens)
-
-
Lighting method
-
Warm white LED lights, Infrared LEDs
-
-
IP rating / IK rating
-
IPX3
*1
-
-
External material
Flame retardant ABS and PS resin
Flame retardant ABS resin
Flame retardant PC+ABS resin
Flame retardant ABS resin
*1 Water resistance is only assured if the Door Station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Trademarks and registered trademarks
- Wi-Fi is a trademark or registered trademark of Wi-Fi Alliance.
- iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
- Android is a trademark of Google Inc.
- All other trademarks identified herein are the property of their respective owners.
Important
- Safety Precaution: carefully read the operating instructions and installation manual before using this product.
• The actual product may vary slightly from photograph.
• All pictures of the LCD display are simulated.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Installing the Doorphone
DISTRIBUTED BY :
MG-DHPL014EN 1510ITP/ZZZ-BX2
Model Composition
VL-SVN511
VL-MVN511 x 1, VL-V522L x 1
Wood screws
Mounting base
Wire
(User supplied)
Screwdriver
83.5 mm
Wall
Screws
Mounting
bracket
Wall
Wire (User supplied)
83.5 mm
Installing the Power Supply Unit
Installing the Relay Box
Front view
Front view
Top view
Bottom View
Top view
Bottom View
Side View
Top View
DC Cable
AC IN connector
To the electric lock
Remove the screw
on the cable cover.
25 mm
7 mm
R1 R2 R3
1 2
R1 R2 R3
1 2
1
2
S1 S2
S3 S4
DC OUT
terminal
Cable binder
hole
Electric lock
terminal
Main monitor
terminal connector
DC cable
binder hole
button
131 mm
186 mm
99 mm
161 mm
Mounting
base
Mounting bracket
Main Monitor
24 mm
86.8 mm
83.5 mm
83.5 mm
Image range
Centre of
doorphone
1450 mm
650 mm
1810 mm
1160 mm
500 mm
66°
87°
500 mm
960 mm
From the main monitor
Installing the Main Monitor
•Installation Position
9 mm
Cable from the main monitor
7 mm
25 mm
Cable from the electric lock
AC cable
DC cable
Remove the screw
on the cable cover.
100
78
104
92
99
161
131
186
54
38
36.5
23.5
Up to 2
