manualshive.com logo in svg

Panasonic VL-MWD275, Operating Instructions Manual

Share
Download
Panasonic VL-MWD275 Operating Instructions Manual Download Page 3

1.1 Model composition

Model composition

Main Monitor Station

*1

(Main monitor

*2

)

Wireless monitor station

(Sub monitor

*2

)

Door Station

(Doorphone

*2

)

VL-SWD275

VL-MWD275

VL-WD619

VL-V524

VL-MWD275

VL-MWD275

-

-

*1 Can be configured to be used as an extension monitor.
*2 Product names used in this document.

Note:

R

Before attempting to connect or operate this product, please read the nameplate on the bottom or rear of the
product.

1.2 Accessory information

1.2.1 Supplied accessories

For the sub monitor

Accessory
item

AC adaptor/
PNLV226

Rechargeable
batteries

Charger

Quantity

1

2

1

Note:

R

Accessories for installing the main monitor and the doorphone are described in the supplied Installation Guide.

R

You will need the following additional items (locally procured) to install the charger on the wall.
– Screws 

´

 2:

Prepare the screws according to the material, structure, strength and other factors of the mounting area and
the total weight of objects to be mounted.

3

1. . Introduction

1. Introduction

Summary of Contents for VL-MWD275










































Reviews:

No comments

Brands by name

Popular brands

Load more brands