11.2 Error messages - main monitor
The following error messages can be viewed by pressing
M
N
®
select
“
Information display
”
®
“
Status
of connected devices
”
.
Display
Cause & Solution
Page
“
Cannot be used.
”
R
The wiring between the main monitor and extension monitor is not
connected.
→ Check the wiring connections.
R
The registration number used for the extension monitor is different on
the main monitor and extension monitor.
→ Use the same registration number on the main monitor and
extension monitor.
R
2 extension monitors are using the same registration number.
→ Cancel 1 of the extension monitors so that it becomes a main
monitor again and then re-register it with a different registration
number.
R
Power is not connected to the extension monitor.
→ Connect power to the extension monitor.
“
Not registered.
”
R
The sub monitor or extension monitor has not been registered on the
main monitor.
11.3 Error messages - extension monitor
Display
Cause & Solution
Page
“
Cannot connect to
the main monitor.
Please check the
connection
”
R
The wiring between the main monitor and extension monitor is not
connected.
→ Check the wiring connections.
R
The extension monitor has not been registered on the main monitor.
→ Register the extension monitor on the main monitor.
R
The registration number used for the extension monitor is different on
the main monitor and extension monitor.
→ Use the same registration number on the main monitor and
extension monitor.
11.4 Error messages - sub monitor
Display
Cause & Solution
Page
“
Cannot connect to
main monitor
station
”
R
The sub monitor is too far from the main monitor, or there is an object
such as a concrete wall obstructing the signal.
→ Move the sub monitor closer to the main monitor or to an area that
does not have any obstructions.
“
Registration
failed
”
R
Registration to the main monitor has not been completed. Bring the
sub monitor closer to the main monitor and try registering again.
-
37
11. Troubleshooting
