28
■
When talking between monitor station and sub monitor station
(Press-
to-talk cannot be used)
<Monitor station>
<Sub Monitor station>
•
While one monitor station and sub monitor station is being used, other monitor
station and sub monitor station cannot be used.
•
Monitor station and sub monitor station can be divided into groups and be called
by group. (Pages 30, 41)
When connecting expansion units
•
If there is no answer within 1 minutes after you call, the call will be canceled.
If the following happens:
•
When you call another unit, the message
“OTHER INTERCOM IS USING IT” is
displayed and a series of short beeps are
heard.
•
A call comes from a door station while
you are talking.
A ringer tone will be heard, so you can
press
【
TALK
】
to end your conversation,
and then press
【
TALK
】
again to talk
with the person at the door station.
The other unit is being used. Wait a while
and then call again.
Using the unit
【
CALL
】
【
TALK
】
1
Press
【
CALL
】
.
【
MENU
】
2
Press one of the buttons to the right
of the screen in accordance with the
screen display.
After the calling tone sounds, make
the call.
A short BEEP will tone.
3
Wait for an answer, and then talk.
Press
【
TALK
】
and then talk.
4
When the conversation is finished:
Press
【
TALK
】
.
<The conversation ends.>
•
The conversation will end even if
【
TALK
】
on the sub monitor station
is pressed.
【
SELECT (
▲
)
】
【
SELECT (
▼
)
】
