Panasonic Vieta TX-26LXD70A, Service Manual

Page: 19 / 79

9.2.2. Exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
9.3. Option Description
Name Value Current Default 26/32LXD70A Note
option1
b0 ATP Search speed Slow(1)/Fast(0) Fast (0) 0 For CS
b1 TEXT Ch Refresh enable(1)/disable(0) disable (0) 0 For CS
b2 ID-1 enable(1)/disable(0) disable (0) 0 For CS
EEPROM b3 Macrovision Auto-judge enable(1)/disable(0) disable (0) 1 For derivative models
004B b4 SRS surround surround_1(1)/surround_0(0) surround_0 (0) 0 For derivative models
b5 Teletext Top-service disable(1)/enable(0) enable (0) 0 For derivative models
b6 Pre Emphasis enable(1)/disable(0) disable (0) 0 For derivative models
b7 0
option2
b0 0
b1 A2 enable(5.5) enable(1)/disable(0) disable (0) 1 For CS
b2 A2 enable(6.0) enable(1)/disable(0) disable (0) 0 China/Asia Only
EEPROM b3 A2 enable(6.5) enable(1)/disable(0) disable (0) 0
004C b4 0
b5 NICAM enable(5.5) enable(1)/disable(0) disable (0) 0 For CS
b6 NICAM enable(6.0) enable(1)/disable(0) disable (0) 0 China/Asia Only
b7 NICAM enable(6.5) enable(1)/disable(0) disable (0) 0
option3
b0 NICAM priority(ASIA/M.E) enable(1)/disable(0) disable (0) 0 For CS
b1 NICAM priority(K/UK) enable(1)/disable(0) disable (0) 0 China/Asia Only
b2 NICAM priority(CHINA) enable(1)/disable(0) disable (0) 0
EEPROM b3 NICAM priority(NZ/INDN) enable(1)/disable(0) disable (0) 0
004D b4 NICAM priority(AUS) enable(1)/disable(0) disable (0) 0
b5 NICAM priority(E.EURO) enable(1)/disable(0) disable (0) 0
b6 NICAM priority(SPECIAL) enable(1)/disable(0) disable (0) 0
b7 0
9.4. OPTION Setting
If the memory IC or DG Board is replaced, option code should be re-memorized.
If you use for other model, you should re-memorized the different option code in SERVICE mode.
Option No. TX-26LXD70A TX-32LXD70A
OPTION1 08 08
OPTION2 02 02
OPTION3 00 00
19
TX-26LXD70A / TX-32LXD70A