Panasonic Viera TX-P42X60B Operating Instructions Manual Download Page 3

3

 

 Take care

 Warning

 

 Do not remove covers and never 
modify the TV yourself as live 
parts are accessible when they 
are removed. There are no user 
serviceable parts inside.

 

 

 Do not expose the TV to rain 
or excessive moisture. This TV 
must not be exposed to dripping 
or splashing water and objects 
filled with liquid, such as vases, 
must not be placed on top of or 
above the TV.

 

 

 Do not insert foreign objects into the TV through the air 
vents.

 

 Do not use an unapproved pedestal / mounting 
equipment. Be sure to ask your local Panasonic dealer 
to perform the setup or installation of approved wall-
hanging brackets.

 

 Do not apply strong force or impact to the display panel.

 

 Do not place the TV on sloped 
or unstable surfaces, and ensure 
that the TV does not hang over 
the edge of the base.

 

 

 Do not expose the TV to direct 
sunlight and other sources of 
heat.

 

 To prevent the 
spread of fire, keep 
candles or other 
open flames away 
from this product at 
all times

 

 

 Dangerous part / Small object

 Warning

 

 This product contains possibly dangerous parts such 
as plastic bags, that can be breathed in or swallowed 
by young children accidentally. Keep these parts out of 
reach of young children.

 

 Pedestal

 Warning

 

 Do not disassemble or modify the pedestal.

 Caution

 

 Do not use any pedestal other than the one provided 
with this TV.

 

 Do not use the pedestal if it becomes warped or 
physically damaged. If this occurs, contact your nearest 
Panasonic dealer immediately.

 

 During setup, make sure that all screws are securely 
tightened.

 

 Ensure that the TV does not suffer any impact during 
installation of the pedestal.

 

 Ensure that children do not climb onto the pedestal.

 

 Install or remove the TV from the pedestal with at least 
two people.

 

 Install or remove the TV by the specified procedure.

 

 Ensure that the mains plug is easily accessible.

 

 Disconnect the mains plug when cleaning the TV.

 

 Do not touch the mains plug with wet 
hands.

 

 

 Do not damage the mains lead.

 

 Do not place a heavy object 
on the lead.

 

 

 Do not place the lead near a 
high temperature object.

 

 

 Do not pull on the lead. Hold 
onto the mains plug body 
when disconnecting the plug.

 

 

 Do not move the TV with the lead plugged into a 
socket outlet.

 

 Do not twist the lead, bend it excessively or stretch it.

 

 Do not use a damaged mains plug or socket outlet.

 

 Ensure the TV does not crush the mains lead.

 

 Do not use any mains lead other than that provided with 
this TV.

 

 Ensure the earth pin on the mains plug is securely 
connected to prevent electrical shock.

 

 An apparatus with CLASS I construction shall be 
connected to a mains socket outlet with a protective 
earth connection.

  IMPORTANT: 
THE MOULDED MAINS PLUG

 FOR YOUR SAFETY, PLEASE READ THE 
FOLLOWING TEXT CAREFULLY.

 This TV is supplied with a moulded 3-pin mains plug 
for your safety and convenience.
 A 10 amp fuse is fitted in this mains plug. Shall the 
fuse need to be replaced, please ensure that the 
replacement fuse has a 10 amp rating and that it is 
approved by ASTA or BSI to BS1362.

 Check for the ASTA mark 

 or the BSI mark 

 on 

the fuse body.
 If the mains plug contains a removable fuse cover, 
you must ensure that it is refitted when the fuse is 
replaced.
 If you lose the fuse cover, the mains plug must not be 
used until a replacement cover is obtained.
 A replacement fuse cover may be purchased from 
your local dealer.
 Do not cut off the mains plug.
 Do not use any other type of mains lead except the 
one supplied with this TV. The supplied mains lead 
and moulded plug are designed to be used with this 
TV to avoid interference and for your safety.
 If the socket outlet in your home is not suitable, get it 
changed by a qualified electrician.
 If the plug or mains lead becomes damaged, 
purchase a replacement from an authorised dealer.

 WARNING: THIS TV MUST BE EARTHED.

 How to replace the fuse:

 

 Pull out the fuse cover with a 
screwdriver and replace the fuse.

Summary of Contents for Viera TX-P42X60B

































Reviews: