English
13
5
1
[DVB-C Network Settings]
Depending on the country you select, select your cable provider beforehand by following the on-screen
instructions.
Frequency
Auto
Network ID
Start Auto Setup
Auto
DVB-C Network Settings
select [Start Auto Setup]
access
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider
with numeric buttons.
2
[DVB-C Auto Setup]
3
[DVB-T Auto Setup]
0%
100%
1
2
3
100
100
CBBC Channel
BBC Radio Wales
E4
100
Searching
DVB-C Auto Setup
Progress
This will take about 3 minutes.
No.
Channel Name
Type
Free TV
Free TV
Free TV
Quality
Free TV: 3
Pay TV: 0
Radio: 0
CH 5
69
62
62
62
100
100
CBBC Channel
BBC Radio Wales
E4
100
62
100
Cartoon Nwk
Searching
CH
Channel Name
Type
Free TV
Free TV
Free TV
Free TV
Quality
Free TV: 4
Pay TV: 0
Radio: 0
DVB-T Auto Setup
Progress
This will take about 3 minutes.
Depending on the country you select, the channel selection screen
will be displayed after DVB-T Auto Setup if multiple channels have
the same logical channel number. Select your preferred channel or
exit the screen for automatic selections.
4
[Analogue Auto Setup]
5
Preset Download
If Q-Link, VIERA Link or similar technology compatible recorder
is connected, channel, language and country / region settings are
automatically downloaded to the recorder.
0%
100%
Sending Preset Data
Please wait!
Remote control unavailable
If downloading has failed, you can download later through the
Setup Menu.
CH 29
CH 33
BBC1
CH 2
78
41
CC 1
Searching
CH
Channel Name
Analogue: 2
Analogue Auto Setup
Scan
This will take about 3 minutes.
6
Setup the network connection
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 16).
To setup the wireless connection, the Wireless Adaptor (optional accessory) is required. Please note that this
TV does not support wireless public access points.
Ensure the network connections (p. 11) and network environment are completed before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired
Wireless
Set later
[Wired]
“Wired connection” (p. 11)
[Wireless]
“Wireless connection” (p. 11)
select
access
To setup later on or skip this step
Select [Set later] or
[Wired]
1. Select [Auto]
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful
and the TV is
connected to the
network.
: failed
Check the settings and
connections. And then
select [Retry].
Acquire IP Address
Auto
Manual
select
access
Automatically setup is done and the test of the
network connection starts.
To set manually, select [Manual] and set each item.
2. Go to the next step
(Press twice)
