Panasonic Viera TX-P42ST30B, Service Manual

Page: 23 / 136

23
8.9. Remove the SS2-Board
1. Disconnect the Side terminal cover and the Shield metals
(See section 8.4.).
2. Remove the SS-Board (See section 8.8.).
3. Disconnect the flexible cable (SS66).
4. Remove the screws (
×
2 ) and remove the SS2-Board.
8.10. Remove the Fan
1. Unlock the cable clampers to free the cable.
2. Remove the screws (
×
3 ).
3. Remove the Relay connector and remove the Fan.
8.11. Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (
×
2 each) and remove the Speak-
ers (L, R).
8.12. Remove the Stand bracket
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (
×
9 ) and
the Stand bracket.
8.13. Remove the S-Board
1. Remove the screws (
×
2 ) and remove the S-Board
unit.
2. Remove the screws (
×
2 ).
3. Disconnect the connector (S10) and remove the S-Board
from the Power button bracket.