Panasonic Viera TX-P42GT30E, Service Manual

Page: 22 / 142

22
8 Disassembly and Assembly Instructions
8.1. Remove the Rear cover
1. See PCB Layout (Section 3)
8.2. Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (
×
2 ) and remove the Inlet metal.
4. Remove the screw (
×
1 ) and remove the AC inlet.
8.3. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P11, P34 and P35).
3. Remove the screws (
×
5 ) and remove the P-Board.
8.4. Remove the Terminal covers
and the shield metals
1. Remove the claw (
×
1 ).
2. Remove the Side terminal cover.
3. Remove the claw (
×
1 ).
4. Remove the Bottom terminal cover.
5. Remove the screw (
×
1 ).
6. Remove the USB terminal cover and USB shield metal.
7. Remove the screws (
×
2 ).
8. Remove the Bottom shield metal.
9. Remove the screw (
×
1 ).
10. Remove the Side shield metal.