82
FAQs
Problem
Actions
HDMI
Sound is unusual
Set the sound setting of the connected equipment to
●
“2ch L.PCM”.
Check the “HDMI1 / 4 Input” setting in the Sound Menu. (p. 31)
●
If digital sound connection has a problem, select analogue sound
●
connection. (p. 78)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 72)
●
Turn the connected equipment on and then switch the TV on.
●
(p. 67)
Check an input signal from the equipment. (p. 79)
●
Use an equipment compliant with EIA/CEA-861/861B.
●
Network
Cannot connect to the network
Check the LAN cable is connected properly. (p. 53)
●
Check the connections and settings. (p. 53 - 55)
●
Check the network equipment and network environment.
●
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the file during
DLNA operations
Is media server prepared? (p. 52)
●
Check applicable data format. (p. 52)
●
Cannot operate VIERA CAST
Check the connections and settings. (p. 53 - 55)
●
The server or connected line might be busy now.
●
Other
The TV does not switch On
Press and hold the standby On / Off switch on the remote control
●
for about 1 second if Power LED is red.
Check the mains lead is plugged into the socket outlet.
●
The fuse in the mains plug may have blown. Replace it with one of
●
an identical rating (p. 4).
The TV goes into
“Standby mode”
Off Timer function is activated.
●
The TV enters “Standby mode” about 30 mins. after analogue
●
broadcasting ends.
The remote control does not work
or is intermittent
Are the batteries installed correctly? (p. 6)
●
Has the TV been switched On?
●
The batteries may be running low. Replace them.
●
Point the remote control directly at the front of the TV (within a 30
●
degree angle of the front of the TV).
Situate the TV away from sunshine or other sources of bright light
●
not to shine on the TV’s remote control signal receiver.
Permanently lit spots on screen
Due to production process involved in this technology this may
●
result in some pixels which are permanently lit or unlit. This is not a
malfunction.
An error message appears
Follow the message’s instructions.
●
If the problem persists, contact the authorized Service Centre.
●
