background image

5

Warning

Take care

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:

Do not remove covers and never modify the TV yourself as live parts are accessible when they are 

removed. There are no user serviceable parts inside.

Do not expose the TV to rain or excessive moisture. This TV must not be exposed 

to dripping or splashing water and objects filled with liquid, such as vases, must 

not be placed on top of or above the TV.

Do not expose the TV to direct sunlight and other sources of heat. To prevent fire 

never place any type of candle or naked flame on top or near the TV.

Do not place the TV on sloped or unstable surfaces.

Do not insert foreign objects into the TV through the air vents.

Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to 

perform the setup or installation of approved wall-hanging brackets.

Do not apply strong force or impact to the display panel.

To prevent the spread of fire, keep candles or other open 

flames away from this product at all times

Small object

This product contains possibly dangerous parts that can be breathed in or swallowed by young 

children accidentally.

Keep the dangerous parts out of reach of young children.

Do not allow children to handle SD Card. As with any small object, the SD Card could be 

swallowed by young children. Please remove SD Card immediately after use and store out of 

reach of young children.

Caution

Ventilation

Allow sufficient space around the TV in order to help prevent excessive 

heat, which could lead to early failure of some electronic components.

Ventilation should not be impeded by covering the 

ventilation openings with items such as newspapers, 

tablecloths and curtains.

Whether you are using the pedestal or not, always ensure the vents in the 

bottom of the TV are not blocked and there is sufficient space to enable 

adequate ventilation.

Minimum distance

10

10

10

7

(cm)

Moving the TV

Before moving the TV, disconnect all cables.

The TV is heavy. Move the TV with at least two people. Support as shown to 

avoid injury by the TV tipping or falling.

Transport only in upright position. Transporting the TV with its display panel 

facing upward or downward may cause damage to the internal circuitry.

When not in use for a long time

This TV will still consume some power even in the Off mode, as long as the mains plug is still 

connected to a live socket outlet.

Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.

Excessive volume

Do not expose your ears to excessive volume from the headphones. 

Irreversible damage can be caused.

Summary of Contents for Viera TX-P42C2L





































































Reviews: