English
21
Part names and functions
Power switch
ON / OFF
Slide the tab to the “ON” / “OFF” position to switch the power
On / Off.
MODE
Slide the tab to the “MODE” position to change the mode
between 3D and 2D (view a 3D image in 2D).
This is also used when registering the 3D Eyewear to the TV.
For details
“Registration” (see below)
Indicator lamp
Lights or flashes during use to show the status.
Battery cover
When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
To replace the battery
“Replacing the battery”
(p. 22)
Insulating sheet
Pull
Indicator lamp status
Indicator lamp
Status
Lights red for 2 seconds when turned on
Sufficient battery level
Flashes 5 times when turned on
Low battery level
Flashes red and green alternately
Under registering
Flashes green once every 2 seconds
Under reconnecting to the TV
Lights green for 3 seconds
Registering or reconnecting is successfully completed.
Flashes red 3 times
Automatically power off (Registering or connecting fails
or connection is lost)
Flashes red once every 2 seconds when in use
3D mode is selected
Flashes red twice every 4 seconds when in use
2D mode is selected
Registration
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
1
Turn the TV on
2
Slide the power switch from “OFF” to “ON”
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 50 cm from the TV while registration in progress.
3
The green LED lights on the 3D Eyewear for 3 seconds when the
registration is successfully completed
After first registration, the 3D Eyewear will reconnect with TV automatically when 3D Eyewear is turned on near
the TV in 3D mode.
