background image

Notes / 

 

●●

Maintenance

Safety Precautions

 

5

Caution

When cleaning the TV, remove the 

 

mains plug

Cleaning an energized TV may cause electrical shock.

 

When the TV is not going to be used for 

 

a long period of time, remove the mains 

plug

This TV will still consume some power even in the Off 

 

mode, as long as the mains plug is still connected to a 

live socket outlet.

Allow sufficient space around the TV for 

 

radiated heat

 Minimum distance

 

10

10

10

10

(cm)

When using the pedestal, keep the space between the 

 

bottom of the TV and the surface where the TV is set.

In case of using Wall-hanging bracket, follow the 

 

manual of it.

Do not block the rear air vents

 

Blocked ventilation by newspapers, table cloths, 

 

curtains, etc. may cause overheating, fire or electrical 

shock.

Do not expose your ears to excessive 

 

volume from the headphones

Irreversible damage can be caused.

 

Notes

Auto power standby function

 

If no signal is received and no operation is 

 

performed in Analogue TV mode for 30 minutes, 

the TV will automatically go to standby mode.

Keep the TV away from these types 

 

of equipment

Electronic equipment

 

In particular, do not place video equipment near 

the TV (electromagnetic interference may distort 

images / sound).

Equipment with an infrared sensor

 

This TV also emits infrared rays (this may affect 

operation of other equipment).

Transport only in upright position

 

Maintenance

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.

Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral 

detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is 

dry. 

Caution

The surface of the display panel has been specially treated and may be easily damaged.

 

Do not tap or scratch the surface with your fingernail or other hard object.

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may 

 

degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 

Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

Take care not to subject the TV’s surfaces to detergent (a liquid inside the TV could lead to product failure).

 

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may 

 

deteriorate the surface by peeling the paint).

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

 

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)

Summary of Contents for Viera TX-L37G10E





















Reviews: