SD CARD
8
Identifying Controls
TV
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when “Eco Mode” in the Picture Menu
●
is set to “On” (p. 26)
Changes the input mode
Mains power On / Off switch
Switch On to turn on the TV or turn the TV
●
to standby mode by the remote control
Function select
Volume / Contrast / Brightness / Colour /
●
Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / Auto Setup
(p. 32, 34, 35)
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver
●
and remote control.
Recording LED
Standby for Direct TV Recording: orange
●
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Headphones
jack
(p. 71)
SD Card slot
(p. 58)
Power LED
Standby: red
●
On: green
When using the remote control, indicates the TV has received a command.
●
Accessories / Options
Adjust the panel to your desired angle
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
●
Do not place any objects or hands within the full rotation range.
●
15°
15°
a
b
(View from the top)
TX-L32V10E
●
a: 359 mm / b: 230 mm
TX-L37V10E
●
a: 399 mm / b: 296 mm
Set the mark at the centre as illustrated, to
ensure full degree rotation in either direction.
